We introduce you: The Queen!

Lamitech HPL. Perfect oak imitation. Hardwearing and waterproof. Queenply carrier panel. Here we have the most easy-care and hard-wearing oak look you could find: Cottage Oak HPL by Lamitech – just as high-quality as all the HPL variants in our shop. This oak wood texture is a perfect imitation, hard-wearing and absolutely waterproof. Have you ever thought about building an oak-look shower enclosure? Then you've probably found the solution now. The surface is also easy to clean. Unlike real veneers, you don't have to oil or varnish it. Thanks to the HPL wood decor, every panel looks the same. So if you prefer a uniform surface rather than the slight variations that come with every real wood veneer, then that's another advantage of this worktop. Applied to our Queenply carrier panel, you have all kinds of possibilities with this surface: Furniture fronts, tables, doors, pedestals, worktops or counters – build with it whatever you want. Just take a look at the technical details for the most important technical information before starting.

High-quality acrylic decor in beige. Super matt and velvety soft surface. Great for combining. Watch out! With this decor, you've chosen something really great! Until now, this color was reserved for CVS, German professionals for interior fitter for campervans. However, so many of you liked it so much and the demand for it was so high that we have now been given the go-ahead by CVS to include it in our stock programme. This means for you: You can now use the Queenply beige extreme matt for your project and build lots of cool things with it. The deep beige shade is really special and great to combine with other colors or real wood veneers. The professionals of CVS prove time and time again what this can look like in a van. The super matt surface, the anti-fingerprint effect and the velvety-soft texture are additional plus points. You can feel the difference to cheaper surfaces immediately. And with Queenply as the core panel, you also have all the technical advantages on your side: a waterproof and heat-resistant PUR hotmelt bonding between the surface and the core panel, so that the surface does not peel off when exposed to heat or moisture. And the panel is calibrated to an accuracy of 0.2 mm, so you don't have to worry about thickness tolerances during further processing. Further technical information, strengths and tips on care can be found here on the technical details page.

Lightweight panel. High quality HPL in white. Different sizes. Pearl matt surface. Forget all the white-coated plywood boards you have used so far. The white decor of our Queenply Multiplex will inspire you. Because we not only pay attention to the technical quality of our wood materials, but also to noble and high-quality surfaces. And even the classic white is in a category of its own. It is pearly matt and feels really velvety. The HPL surface is valuable, but at the same time easy to clean. That's why Multiplex white is perfect for furniture fronts and carcase areas in your van. It can also be combined with other colours or surfaces. Many of our customers choose a wood veneer to complement this. That looks really great. You can order this lightweight panel from us in four different thicknesses. A little tip: The lightweight board in 4.6 mm thickness is covered on one side with permatt white HPL. It is therefore extremely suitable for wall and ceiling panelling. Would you like more technical details? Then take a look at the product description here.

Vibrant wood veneer on lightweight queenply. Multiplex board. Real wood veneer. For a homely atmosphere. The olive ash owes its name to a special core formation, which resembles the wood of the olive tree in its coloring. Do you know that? Characteristic for this wood are the clearly visible wavy zones of alternating olive/dark brown and lighter wood coloration. This makes the wood very lively. You like that? Then this veneer on our Queenply lightweight panel is just right for you. You can get the Multiplex Olive Ash in different thicknesses, veneered on one or both sides (depending on the thickness) here in our store. By the way, the finishing boards in lowest thickness are also very suitable for walls and ceilings. This makes the van very cozy!

HPL in Lamitech quality. Color: blue-green. Queenply carrier panel. With OPAK and MATT surface. Firstly, we would like to say that you will hardly find a higher quality, more durable HPL than Lamitech. Why are we so convinced of this? Lamitech HPL is almost unbeatable when it comes to the combination of elegant appearance and robustness: scratch-resistant, hard-wearing and therefore perfect for any vehicle interior, at home, in commercial areas and offices. The Bleen color (a mix of blue and green) of this HPL surface is a beautiful, saturated color that you can use in many areas or combine very well with other colors and surfaces. We bring this special Lamitech HPL together with our best carrier panel: Queenply. And you also have the choice between two really cool surface varieties of HPL: OPAK and MATT. A brief explanation: Bleen OPAK (extremely matt, anti-fingerprint): Premium HPL. Velvety soft touch surface. With anti-fingerprint effect. Water-repellent. Antimicrobial coating. Heat-resistant. And what's really impressive: micro-scratches can be polished away with a dirt eraser sponge. Even coffee or wine stains are no problem. In everyday life, in the office, when travelling: Backpacks, dogs, children, customer traffic - no scratches or marks remain on the surface. This makes it suitable for kitchens, conference tables, catering areas, van conversions, interior fittings and anything else you can think of. Bleen MATT (slightly pearl structure): High-quality HPL variant. Light pearl structure with matt effect. However, without anti-fingerprint finish. But just as hard-wearing. Antimicrobial coating. Water-repellent. Abrasion-resistant. Why do we offer two variants? The option of combining two variants is not only practical, but also cost-saving. For cabinets, technical compartments and all types of furniture. An anti-fingerprint coating is not necessarily required on the inside or on the back. If you choose the MATT surface in the same color for the back, it will be more cost-effective. Design and color remain in line and you still have the high quality of Lamitech installed. That's good, isn't it? How can you choose the variants? Whether the same coating on both sides or a mix: OPAK/OPAK or OPAK/MATT or MATT/MATT. It's easy to order: Use the buttons on this product page 1. Select the thickness of the Queenply carrier panel. 2. Specify surface variants. 3. And place your order. Perhaps you need more information to make the right choice? Then take a look here or go to Technical details.

Lamitech HPL = highest quality. Color: Burgundy red. Variants OPAK and MATT. Combined with Queenply, of course. You are looking for a deep, slightly elegant HPL color? Then this burgundy red might be just the right color for your extension plans. Whether as a splash of color or for larger areas: both is possible. And what is also important: you will hardly find a higher quality, more durable HPL. Why are we so sure? Lamitech HPL is almost unbeatable in its combination of classy and robust: scratch-resistant, hard-wearing and therefore perfect for any vehicle interior, for homes, commercial areas and offices. We combine it with our best carrier panel: Queenply. The difference between the two HPL surface variants OPAK and MATT: Burgundy OPAK (extremely matt, anti-fingerprint): Premium HPL. Velvety soft touch. With anti-fingerprint effect. Water-repellent. Antimicrobial coating. Heat-resistant. Micro-scratches can be polished away with a dirt eraser sponge. Even coffee or wine stains are no problem. For everyday use, in the office, when travelling: Backpacks, dogs, children, customer traffic - no scratches or marks remain on the surface. And it remains as beautiful as it was at the beginning. That's why it is suitable for kitchens, conference tables, catering areas, van conversions, interior fittings and much more. Burgundy MATT (slightly pearl structure): High-quality HPL variant. Light pearl structure with matt effect. However, without anti-fingerprint finish. But just as hard-wearing. Antimicrobial coating. Water-repellent. Abrasion-resistant. Why we offer two versions in our online shop? Quite simply: the combination is not only practical, but also cost-saving. For cupboards, technical compartments and furniture construction. An anti-fingerprint coating is not necessarily required on the inside or on the back. So, if you choose the MATT surface in the same color for the back, it is more cost-effective, the design and color remain in line and you can be sure that you are still using an absolutely high-quality Lamitech surface. Simply select variants when ordering! Whether the same coating on both sides or a mix: OPAK/OPAK or OPAK/MATT or MATT/MATT. You simply select via the buttons next to the product pictures: 1. thickness of the Queenply carrier panel. 2. surface variants. 3. the shopping basket. Maybe you still need some more informations about Lamitech? Find it here or take a look at the technical details.

Lamitech HPL. Color: Mustard. Scratch-resistant and high quality. Surface variants: OPAK and MATT. You like the slighly earthy and natural mustard color? Perhaps you are also looking for an HPL for your project that is a little unusual? All right. Perhaps Lamitech Mustard would be a suitable color. Of course, Color tones are certainly open to debate. What is certain, however, is that you will hardly find a higher quality, more durable HPL than Lamitech. Regardless of the color. Lamitech HPL is almost unbeatable when it comes to the combination of a sophisticated look and robustness: scratch-resistant, hard-wearing and therefore perfect for any vehicle interior, at home, in commercial areas and offices. In addition, we bring Lamitech Mustard together with our best carrier panel: Queenply. And you have the choice between OPAK and MATT versions. A brief explanation: Mustard OPAK (extremely matt, anti-fingerprint): Premium HPL. Velvety soft feel. With anti-fingerprint effect. Water-repellent. Antimicrobial coating. Heat-resistant. And what's really impressive: Micro-scratches can be polished away with a dirt eraser sponge. Even coffee or wine stains are no problem. In everyday life, in the office, when travelling: Backpacks, dogs, kids, customer traffic - no scratches or marks are left on the surface. This makes it suitable for kitchens, conference tables, catering areas, van conversions, interior fittings and anything else you can think of. Mustard MATT (slightly pearl structure): High-quality HPL variant. Light pearl structure with matt effect. However, without anti-fingerprint finish. But just as hard-wearing. Antimicrobial coating. Water-repellent. Abrasion-resistant Why do we offer two versions of the same color? This combination option is not only practical, but also cost-saving. For cabinets, technical compartments and all types of furniture. An anti-fingerprint coating is not necessarily required on the inside or on the back. If you choose the MATT surface in the same color for the back, it will be more cost-effective. Design and color remain in line and you still have the high quality of Lamitech installed. That's good, isn't it? How to chose the surface varieties? Whether coated on both sides or in a mix: OPAK/OPAK or OPAK/MATT or MATT/MATT. It's easy to order: 1. Select the thickness of the Queenply carrier panel. 2. Specify surface variants. 3. Place your order. Maybe you need further information for the right choose? Take a look at this or read through the Technical details.

Lamitech HPL in a great Blue. Highest quality. OPAK and MATT surface variants. On Queenply panel. If you like slightly deeper, eye-catching colors, you should definitely take a closer look at this Lamitech HPL. This blue color looks really classy and can be combined very well with other colors or real wood. And you will hardly find a higher quality and a more durable HPL than Lamitech. Lamitech HPL is almost unbeatable in the combination of elegance and robustness: scratch-resistant, hard-wearing and therefore perfect for any vehicle interior, at home, in commercial areas and offices. We combine it with our best carrier panel: Queenply. And you also have the choice between two variants of HPL: OPAK and MATT. Let us briefly explain the difference. Pacific Blue OPAK (extremely matt, anti-fingerprint): Premium HPL. Velvety soft feel. With anti-fingerprint finish. Water-repellent. Antimicrobial coating. Heat-resistant. And, here's the thing: micro-scratches can be polished away with a dirt eraser sponge. Even coffee or wine stains are no problem. In everyday life, in the office, when travelling: Backpacks, dogs, children, customer traffic - no scratches or marks are left on the surface. This makes it suitable for kitchens, conference tables, catering areas, van conversions, contract fit-outs and anything else you can think of. Pacific Blue MATT (light pearl structure): high-quality HPL variant. Light pearl structure with matt effect. One difference: without anti-fingerprint finish. But just as hard-wearing. Antimicrobial coating. Water-repellent. Abrasion-resistant. You can choose the variant! Whether the same coating on both sides or in a mix: OPAK/OPAK or OPAK/MATT or MATT/MATT. It's easy to order: 1. Select the thickness of the Queenply core panel. 2. Specify the surface variants. 3. Place your order. Why do we offer two variants at all? The combination option is not only practical, but also cost-saving. For cabinets, technical compartments and all types of furniture. The inside does not necessarily have to have an anti-fingerprint coating. So, if you choose the MATT surface in the same color for the back, it is more cost-effective and at the same time the design and color remain in line. That's good, isn't it? Perhaps you need more information to make the right choice? Then take a look here or change to “technical details”.

Veneer pattern: wide lamella look. Sustainable material: bamboo. Natural color. On extremely lightweight carrier panel. Our bamboo veneer in a wide lamella look has a really beautiful veneer pattern that reflects the full wood-like appearance of this sustainable material. Since bamboo is becoming increasingly popular in furniture making not only because of its sustainability, but also because of its inviting color, we naturally also have Queenply with bamboo veneer in our range for you and your interior plans. You can get our bamboo panel in four different thicknesses, veneered on one side or both sides. The single-sided bamboo veneer (5 mm) is for example perfect for walls and ceilings. In bamboo decor it looks friendly, cozy and inviting! Multiplex boards veneered on both sides are ideal for furniture construction. You can also combine them with great HPL or acrylic decors from our shop. That looks really great. But no matter which plywood panel you need from us: all variants naturally also have good technical values. Just look at the technical details.

Veneer pattern: narrow line pattern. Made from sustainable bamboo. Natural color. On extremely lightweight carrier panel. This bamboo veneer consists of side pressed lamella. This results in a rather narrow line pattern in which you can still recognise the characteristic ring-shaped thickening of the bamboo stems. Since bamboo is becoming increasingly popular in furniture making not only because of its sustainability, but also because of its inviting color, we naturally also have Queenply with bamboo veneer in our range for you and your interior plans. You can get our bamboo panel in four different thicknesses, veneered on one side or both sides. The single-sided bamboo veneer (5 mm) is for example perfect for walls and ceilings. In bamboo decor it looks friendly, cozy and inviting! Multiplex boards veneered on both sides are ideal for furniture construction. You can also combine them with great HPL or acrylic decors from our shop. That looks really great. But no matter which plywood panel you need from us: all variants naturally also have good technical values. Just look at the technical details.

Rust style on multiplex. Best lightweight panel in old rust style. For many creative ideas. Now that's something completely different! A multiplex panel with a rust surface. Are you already thinking about what you can build with it? Go ahead, we are very excited! Our rust surface can be used in many ways. You can use it in furniture construction, as wall cladding, on ceilings or stairs, in trade fair or shop construction – there are almost no limits to your ideas. Especially in contrast with other HPL or acrylic surfaces, you can create truly extraordinary combinations. The coating is smooth and consists of mineral, solid-coloured materials – and real metal particles. At the same time – and this is also very important to us – it is ecologically harmless and recyclable. And for the most comfortable and simple processing possible, we naturally apply the decor to our best lightweight panel: Queenply. The low weight (approx. 320 – 350 kg/m3) makes processing easier for you. You don't have to carry and install the mass of real iron panels! For more technical information, just take a look at the "Technical details".

Acrylic decor in dark grey. Velvety surface. Noble optics. Great to combine. On the lightest multiplex on the market. Beautiful, more beautiful, dark grey. That’s how you could put it. The acrylic decor in dark grey really makes a statement as a furniture front in camper vans, on yachts or for interior designs. This is not only due to the deep-dyed color, but also to the super-matte surface and the velvety-soft surface structure. Once you feel it, you won’t want anything else. It is simply a difference to cheap lightweight boards from the hardware store.  Besides, all the technical properties speak for themselves: the carrier panel is the lightest weight panel on the market, the decorative surface is insensitive against dirt and easy to clean – even though it looks so noble and high-quality. And the color is UV-resistant, so it doesn’t fade quickly in the sun. You’d rather get more technical information first? Then just take a look at the technical details.

WOW! Concrete look in noble anthracite. On the lightest multiplex on the market. For industrial design and more. Wood meets concrete! That's new and something completely different! And you can use it to create an incredible number of great extensions and interiors. We now offer you our Queenply with a concrete surface in anthracite. And this surface not only looks like concrete, it also feels like it. The look and feel are authentic to real exposed concrete, including air inclusions and a three-dimensional depth structure. You can use it to simulate modern industrial design in vans, in yacht interiors, on trade fair booths, in shop fitting or for living environments and create almost anything you want: Furniture, wall or ceiling panelling, stairs and much more. Combinations with one of our real wood veneers, for example, are particularly popular right now. The processing is – like the work with all Queenply multiplex panels – simple and time-saving. Standard carpentry tools are all that is needed. You will also find matching edges and accessories for this surface in our shop. 

Concrete look on Queenply. With 3D deep structure. High-quality decor in light grey. So far, this is unique in the wood industry: concrete look on a wood core panel. And then, on top, on the lightest finishing panel on the market!  It not only looks like concrete, it also feels like it. With our latest surface, we offer you the opportunity to create interiors with a concrete look in light grey – with an authentic look and feel, with air inclusions and a three-dimensional depth structure. With it, you can simulate modern industrial design and create almost anything you want: Furniture, wall or ceiling panelling, stairs and much more. The processing is – like working with all Queenply multiplex panels – simple and time-saving. It's cool: You can process concrete very easily. We can't wait to see what you make out of it! Standard carpentry tools are all you need. You will also find matching edges and accessories in our shop next week. 

Finishing board with WOW effect. Anti-fingerprint. White super matt. Velvety surface. "Wow!" – that’s what many of our customers say when they hold this finishing board in their hands for the first time. And our Queenply Multiplex white supermatt is definitely special. In addition to the particularly matte, noble look and the velvety soft surface, it also gives greasy fingers no chance. This is something unique! And from your furniture a special feature. At the same time, we have made sure that the decor, with all its high quality, is at the same time pressure-resistant and easy to clean. This Queenply is therefore one of our masterpieces for all interior fittings in motorhomes, yachts and any interior design. But it’s not just the exterior that counts. The technical values must also be right. You can find everything about this under "Technical Details".

Acrylic decor in supermatt. Elegant color tone. High quality and easy to clean. On extremely light multiplex. This dyed-through acrylic decor is really something quite different: the petrol shade in supermatt looks fresh on the one hand, but also very high-quality. And perhaps it suits your love of nature and the outdoors? The surface structure is sure to delight you when you hold the lightweight panel in your hands. It is velvety-soft and feels very pleasant. The color is highly UV-resistant. So that the great color does not fade so quickly. Many high-quality surfaces are sensitive at the same time – this acrylic decor is chemically resistant and has antibacterial surface properties. Not a bad plus in this day and age. The basis for the decor is of course our Queenply Multiplex in 15 mm or 18 mm thickness, covered on both sides. This allows you to give free rein to your creativity. You can find all the necessary technical information here in the details.

Extremely light multiplex panel. Color grey-green. HPL coating. Easy to clean-surface. If you like to be outdoors and love nature, you will definitely like this surface shade in grey-green, which is great for van furniture, for example. With our Queenply multiplex with gray-green HPL surface you can realize great fixtures in any case. In combination with a wood veneer like bamboo or walnut, it looks really atmospheric. The surface has a pearl structure, is scratch-resistant and easy to clean. So ideal for all your creative finishing ideas. The core board has the same good technical properties as all our Queens. Just read the technical information here in the product description again.

High-quality decor. Anthracite – pearl matt. Multiplex finishing board. Velvety surface. Furniture with anthracite-coloured decor looks noble and elegant. Would you also like this for your project? Then this Queenply is just the thing for your interior. The anthracite decor is pearl matt, the surface texture feels velvety. You can see the high quality immediately. And you can combine the anthracite well with other colour decors or wood veneers. Many of our interior design professionals use this option to create a very individual look. We also offer you a large selection with our numerous decor variants. In addition, our Queen is easier to process than other plywood panels due to its low weight of approx. 320 – 350 kg/m³. You can find even more technical information under "Technical details".

WOW! Scratch removal made easy! Lamitech HPL in a warm green shade. Opak or matt surface. This absolutely high-quality HPL surface from Lamitech has a natural, warm green tone and is ideal for finishing projects in which you want to achieve a cozy and natural atmosphere. And that's not all. We have two versions of it in our store for you to choose from. Bonsai Opak (extremely matt, anti-fingerprint) is our absolute Lamitech premium surface. Velvety soft-touch feel, water-repellent, with anti-fingerprint effect and ... resistant to micro-scratches! Micro-scratches from keys, cups or knives can be repaired with a dirt eraser sponge. Everything can be removed in a few simple steps. Even coffee or wine stains are no problem. For kitchen worktops or conference tables alone, this decor is an absolute novelty. Bonsai Matt (slight pearl structure) is a classic, but also very high-quality HPL surface with a slight pearl structure in matt. Abrasion resistant and disinfectable. You can see and feel the high quality immediately. You will enjoy it for a long time. We are sure of that. And another thing: you can't only choose the surface variant, but also the thickness of the Queenply carrier panel you need. This means that you can create your own finishing panels. Just as you need them for your furniture, doors, pedestals, counters or worktops. Just three steps to your individual panel Simply select the thickness of the Queenply carrier panel, specify the desired variants and order. That's it. If you need more information about the two surface variants matt or opaque, please take a look at the technical details.

High-quality Lamitech HPL surface. Dark Steel color. Opak or matt. Your have to take a look! An absolute impressive surface, this HPL from Lamitech in color Dark Steel. We were immediately impressed by the quality when we first saw and felt it. And that's why we've brought it together exclusively for our customers with our best carrier panel: Queenply. And it gets even better for you: you have the choice between two really great HPL variants. Dark Steel matt (slight pearl structure) is a very high-quality HPL surface with a slight pearl structure in matt. Abrasion restistant and disinfectable. You can see the high quality immediately. A decor that you will enjoy for a long time. We are sure of that. Dark Steel Opak (extremely matt, anti-fingerprint) beats everything! This variant is absolutely rightly our Lamitech premium surface. Velvety soft, water-repellent, with anti-fingerprint effect and resistant to micro-scratches. These scratches from keys, cups, glasses or knives can be repaired with a dirt eraser sponge. We tested it ourselves. It all goes away again. Even coffee or wine stains are no problem. Both surfaces are suitable for countless interior design ideas. They are often used for furniture fronts. Or for doors, tables and work surfaces in private areas, offices, shop fitting or exhibition areas. Three steps to your customised panel Whether single-sided, double-sided or in a mix: we make it possible! You can put together your own customised extension Queenply panel with this surface in three steps. It's simple: 1. select the thickness of the Queenply carrier panel. 2. specify surface variants. 3. place your order. Matt or Opak? To make the right choice, you may need more information about the two surface variants. You can find this in the technical details

Simply magic away scratches! Opak is the new WOW! Lamitech HPL in timeless Gris Nube. Opak or matt versions. Fresh. Timeless. Easy to combine with other colors. Particularly high quality and applied exclusively for our customers on our Queenply carrier panel. You can use it to design rooms in private, public and business areas. Regardless of whether furniture fronts, tables, doors, pedestals, worktops or counters, this HPL not only looks very high quality and feels very elegant. It is also technically unique. We have two surface variants of this color for you to choose from. Gris nube Opak (extremely matt, anti-fingerprint) is our absolute Lamitech premium surface. Velvety soft, water-repellent, with anti-fingerprint effect and resistant to micro-stratches. Micro-scratches from keys, cups or knives can be repaired with a dirt eraser sponge. Everything goes away again. Even coffee or wine stains are no problem. So for kitchen worktops or conference tables alone, this surface is a really great development. Gris nube matt (slight pearl structure) is a classic, but also very high-quality HPL surface with a slight pearl structure in matt. Abrasion resistant and disinfectable. You can see and feel the high quality immediately. You will enjoy it for a long time. We are sure of that. And another thing: you can't only choose the variaty, but also the thickness of the Queenply carrier panel. That means you can mix it. You can put together your own extension panels. Just three steps to your customised panel Simply select the thickness of the Queenply carrier panel, specify the desired surface variants and get ready to order. That's it. If you need more informations about the two surface variants matt and Opak, please take a look at the technical details.

No more micro-scratches on HPL! High-quality Lamitech. Opak or matt. Color: sandstone. This HPL surface from Lamitech is not only particularly high-quality, but also has a particularly beautiful and warm color that is based on sandstone. You can use it to realise many great interior designs. From doors, tables, furniture fronts and work surfaces in private areas to offices, shop fittings or exhibition areas, anything is possible with this surface. The quality is absolutely convincing and we have combined this HPL with our best carrier panel: Queenply. You can only get this combination exclusively from us. And it gets even better: you can choose between two different surface variants of this color. Sandstone matt (slight pearl structure) is a very high-quality HPL surface with a slight pearl structure in matt. Abrasion resistant and disinfectable. You can see the high quality immediately. You will enjoy it for a long time. We are sure of that. Sandstone Opak (extremely matt, anti-fingerprint) is our Lamitech premium surface. Velvety soft, water-repellent, with anti-fingerprint effect and resistant to micro-scratches. Because: micro-scratches caused by keys, cups, glasses or knives can be repaired with a dirt eraser sponge. We tested it ourselves. It all disappears again. Even coffee or wine stains are no problem. This is a novelty, especially for kitchen construction. And one more thing: you can choose both, the variant and the thickness of the Queenply carrier panel. So, mix it up! Just three steps to your customised panel The selection is very simple: 1. select the thickness of the Queenply carrier panel. 2. specify the desired surface variants. 3. place your order. Matt or Opak? To make the right choice, you may need more information about the two surface variants. You can find this in the technical details.

Lightweight panels with ash veneer. Chic surface. Perfect for walls, ceilings, furniture. There’s something about ash wood! Its grain and color make it simply perfect as a decorative veneer. It can be combined with many other colors and surfaces, for example with one of our color-intensive acrylic decors. There are no limits to your creativity. And did you know that? Ash wood is a hard wood. Its bending strength exceeds that of oak. It is elastic, abrasion-resistant and tougher than most of our domestic wood species due to its high breakability. Sounds good for van interiors too, doesn’t it? So, it’s no wonder that we have also developed a Queenply veneer from it: in various thicknesses, veneered on one or both sides. Just as you wish. But it’s not only the exterior that counts. The technical values also count. You can find all the information you need right here under "Technical details".

HPL black matt. Extremely lightweight support panel. For special elegance design. Color psychologists say that the color black stands for individuality, extravagance and elegance. We have adapted our Queenply decor black matt to this elegance. The surface of the HPL is particularly high-quality, its structure velvety-soft. The matt tone makes the color look elegant. You won’t find that anywhere else, we bet. And your extension project will radiate something unique. This decor can be combined with other noble HPL or acrylic decors as well as wood veneers. You think it would suit you and your project? Then go for it! We have this multiplex panel in 15 mm or 18 mm thickness plus HPL for you in our scheme.