Edge sets

ABS edgeband in concrete look. Color anthracite. Perfectly matched to the panel decor imi-concrete vintage anthracite. Do you like our mineral surface imi-concrete vintage anthracite? And maybe you're already planning an interior fitting with it?  Then we have the right additional product for you: We offer you the matching ABS edge in our shop. Perfectly matched to the board decor. You can use it to cover the cut edges of our Queenply and protect the multiplex edge from impacts or damage. In principle, this is not necessary. Unlike many plywood panels, our Queenply has a really beautiful cut edge due to its construction. Well oiled and pre-treated, you can also leave the edges open. However, if you like a decorative and protective edge finish on this surface, we recommend this ABS edge. There are 50 metres on each roll. The width also fits, you can adjust it individually to the thickness of our Queenply Multiplex imi-concrete vintage anthracite. The ABS edgeband can be applied like all other ABS edgebands. You can find more information on this in the technical details for this product. Alternatively, you can also cover the edges individually with an express edge set. We also offer this in our shop. Please take a look at this before you decide.

ABS edgeband for imi-concrete vintage grey surface. Matched to the panel decor. High-quality. If you like our imi-beton vintage grey mineral surface and you are already planning an interior fitting with it, we also offer you the matching ABS edge. You can use it to cover the cut edges of our Queenply and protect the multiplex edge from knocks or damage. In principle, this is not necessary. Due to its construction, our Queenply has a really beautiful cut edge, unlike many plywood panels. Well oiled and pre-treated, you can also leave the edges open. However, if you like a decorative and protective edge finish on this surface, we recommend this original imi-concrete ABS edge, specially matched to the concrete decor. There are 50 metres on each roll. We offer you a width that fits both thicknesses of our Queenply Multiplex imi-concrete vintage grey. The ABS edgeband can be applied like all other ABS edgebands. You can find more information on this in the technical details for this product. Alternatively, you can also cover the edges individually with an express edge set. We also offer this in our shop. Please have a look at this before you decide.

Accessory for imi-rust decor. ABS edge on roll. Protection and decorative finish. Color-coordinated. If you like our mineral surface imi-rust and you are already planning an interior fitting with it, we also offer you the matching ABS edge. You can use it to cover the cut edges of our Queenply and protect the multiplex edge from knocks or damage. In principle, this is not necessary. Due to its construction, our Queenply has a really beautiful cut edge, unlike many plywood panels. Well oiled and pre-treated, you can also leave the edges open. However, if you are looking for a decorative and protective edge finish for this surface, we recommend this original imi-rust ABS edge, specially matched to the rust decor. There are 50 metres on each roll. We offer you a width that you can individually adapt to the thickness of our Queenply Multiplex imi-rust. The ABS edgeband can be applied like all other ABS edgebands. You can find more information on this in the technical details for this product. Alternatively, you can also cover the edges with a color-coordinated edge covering color. We also offer this in our shop. Please have a look at this before you make your decision.

For covering and protecting cut edges. Coordinated with our rust decor. Easy to apply. For the processing of edges and corners of our Queenply Multiplex imi-rust we have a special edge covering paint for you in our shop. This full and tinting color is exactly matched to the rust decor and is 100 percent environmentally friendly pure acrylic dispersion paint, water-dilutable, matt, low-odour and lightfast. The finishing paint is very easy to apply by brush, roller or airless spraying. Of course, you can also leave the edges of the Queenply open. Well oiled and pre-treated, it looks really stylish and classy. However, if you are looking for a decorative and protective edge finish for this surface, then this edge finish paint is perfect for the surface. You can find more information on processing and consumption in the description of the technical details. Is it too much work for you to process the edges individually with the finishing color, but you still want a beautiful edge in the same decor? Then take a look at the ABS edgeband in the matching color, which we also have in our shop.

Matching kit for imi-concrete vintage anthracite decor. For individual edge processing. Color-coordinated. To match our high-quality mineral Queenply surface imi-concrete vintage anthracite, we also have an express edge set for you in our shop. So if you have decided on the really stylish surface in imi-concrete vintage anthracite for your project and would also like to process the cut edges in the same decor, then we have the right thing for you here. It is color-coordinated exactly with the concrete decor. The kit itself consists of a special express coating compound and patina. By the way, you can use it not only to cover the edges, but also to repair small scratches on the surface that can occur during heavy use. The processing of this product is quite simple. You will find more information in the technical details. And since it is known that many things are easier when you can see them, we have also created a suitable processing video for you. You can find it on our YouTube channel. You don't want to work on the edges individually with such a kit, but you still want a beautiful edge in the same decor? Then take a look at the ABS edgeband in the matching color, which we also have in our shop.

Express edging set for individual edging design. Color-coordinated with decor: imi-concrete vintage grey. This express edging set is suitable for our imi-concrete grey mineral surface. So if you have decided on the really stylish surface in imi-concrete vintage grey for your project and would also like to add an individual finish to the cut edges, then this edge set is exactly what you need. It is color-coordinated exactly with the decor. The set itself consists of a special express coating compound and patina. By the way, you can use this kit not only to cover the edges, but also to repair small scratches on the surface. The application is quite simple. You can find more information in the technical details. And since it is known that many things are easier when you can see them, we have also created a suitable processing video for you. You can find it on our YouTube channel. You don't want to work on the edges individually with such a kit, but you still want a beautiful finishing edge in the same decor? Then take a look at the ABS edgeband in the matching color, which we also have in our shop.