For covering and protecting cut edges. Coordinated with our rust decor. Easy to apply.
For the processing of edges and corners of our Queenply Multiplex imi-rust we have a special edge covering paint for you in our shop. This full and tinting color is exactly matched to the rust decor and is 100 percent environmentally friendly pure acrylic dispersion paint, water-dilutable, matt, low-odour and lightfast.
The finishing paint is very easy to apply by brush, roller or airless spraying.
Of course, you can also leave the edges of the Queenply open. Well oiled and pre-treated, it looks really stylish and classy. However, if you are looking for a decorative and protective edge finish for this surface, then this edge finish paint is perfect for the surface.
You can find more information on processing and consumption in the description of the technical details.
Is it too much work for you to process the edges individually with the finishing color, but you still want a beautiful edge in the same decor? Then take a look at the ABS edgeband in the matching color, which we also have in our shop.
Container size: | 250 ml |
---|---|
Veneer/Decor: | imi-rost |
imi-rust edging paint is a weather-resistant, environmentally friendly pure acrylic dispersion paint. It is matt, low-odour, color-clear, highly lightfast and unsaponifiable. Furthermore, it is diffusible and really easy to apply.
The paint dries well and can be recoated after about 12 hours, depending of course on the room temperature and humidity. Used tools can easily be cleaned immediately with water.
Please note that the color representation on your screen may differ slightly from the original color! If you have any questions, please contact us. However, we assure you that the color of this edgeband color is exactly matched to the imi-rust surface.
If you are going to process our lightweight panel, please always ensure that you take adequate safety precautions, such as extracting the chips and wearing protective goggles and a protective mask. Due to the low weight, there is an increased dust formation when processing the Queenply.