€332.56*
Available, delivery time: 1–3 weeks (delivery in even calendar week in BE, FR, LU, NL)
Queenply. The original
- extremely light — extremely stable
- carrier board with 11 layers (thickness 15 mm)
- waterproof thanks to PUR gluing
- calibrated to an accuracy of 0.2 mm
- made from sustainably grown wood
Multiplex panel in velvety blue. HPL decor. Light processing. Easy to clean-surface.
This velvet blue looks very noble. The HPL decor is really high quality and the pearl structure makes it feel the same. The color has a great depth effect. This can be ideally combined with a lighter wood veneer or a light shade.
However, the noble surface is by no means particularly sensitive. If it were, we wouldn't recommend it to you for finishing. The HPL is scratch-resistant, UV-resistant and easy to clean.
Another advantage is the low weight of the multiplex panels of approx. 320 - 350 kg/m3. This makes our Queen the lightest finishing panel on the market and therefore easier to process than other plywood and multiplex boards.
If you are not quite sure about the color, just order a sample from us. Then you can have another look at your leisure.
| Carrier plate: | Queenply with 11 layers (15 mm thickness) |
|---|---|
| Format: | 244 × 122 cm |
| Thickness: | 16,4 mm |
| Weight: | 22,18 kg |
| Coating: | HPL |
| Surface: | Pearl matt |
You can get the Queenply Multiplex velvet blue on the Queenply carrier panel in 15 mm or 18 mm thickness from us. The HPL processed on both sides in 0.7 mm thickness (each) is of course in the same color. Very important: We do not process CPL or melamine. Carrier panel and HPL are glued together in a moisture-resistant manner. We use a special PUR hotmelt process for this, so that the Queenply is waterproof.
As with all of our multiplex panels, this Queenply surface is pressure and scratch resistant as well as easy to clean.
We achieve the low thickness tolerance through a calibration to 0.2 mm.
Due to the multiplex construction you get a finishing panel in noble velvet blue with high screw pull-out resistance and a particularly good stability. No screw will come loose.
Multiplex panels like the Queenply Multiplex velvet blue do not have the same surface properties as chipboard or MDF beams. Any surface irregularities that may occur are in the nature of the carrier and are no reason for a complaint. Production or material-related minimal defects, which do not affect the product quality and are permissible within the 1st choice, are assessed according to the grading rules based on DIN EN 438 and the international ISO standardization.
We also take great care that your ordered Queenply panels leave our factory perfectly and arrive undamaged. You can rely on that! However, we would also like to point out that any distortion of the boards caused by transport or further storage is not a reason for complaint.
Please also note that the representation of the HPL color on your screen may differ slightly from the original color! If you have any questions about this, just contact us. To be on the safe side, you can order a sample of all Queenply variants in our store.
If you are going to process our lightweight panels, please make sure that you take adequate safety precautions, such as extracting the chips and wearing safety goggles and a protective mask. Due to the low weight, there is an increased dust development when processing Queenply.
And another important note:
We pack your finishing panels with extra care before shipping and make sure they leave our warehouse without damage to the edges. However, even with the greatest care, it can happen during transport that a corner is pressed in or the edge is slightly damaged. We know that too. That's why we calculate 1 cm less for each side of every Queenply finishing panel in advance: 249 cm × 121 cm for the raw panel, 243 cm × 121 cm for all composite elements and 247 cm × 120 cm for all veneered panels. This saves us all a lot of time that would otherwise be wasted on complaints. Put this time into your extension - and recommend us to others.