€332.56*
** You will receive a discount of 2.5% on orders of 5 or more plates from our entire range. For orders of 30 plates or more, the discount is even 10%.
This product or format is actually not available. We're getting supplies right now.
Queenply. The original
- extremely light — extremely stable
- carrier board with 11 layers (thickness 15 mm)
- waterproof thanks to PUR gluing
- calibrated to an accuracy of 0.2 mm
- made from sustainably grown wood
High quality HPL decor. Fig-purple pearlescent. Carrier panel multiplex Queenply. Extremely stylish.
According to color theory, the color purple is often associated with a touch of luxury. Well, if that's not the best prerequisite for use as a finishing panel in your project!
If you like the shade, here are a few more facts: The decor in fig-purple is a pearl matte HPL. The surface structure is easy to clean and scratch-resistant and feels really velvety. You won't find anything like it in any hardware store. You can see the high quality and the rich color tone really comes into its own.
The carrier panel is of course our Queenply lightweight with all its well-known advantages, either in 15 mm or 18 mm thickness. All further important technical information can be found under "Technical Details".
Important to know: If you are not sure about the color, just order a sample from us. Then you can have a look at it again. And please also bear in mind that the representation of the HPL color on your screen may differ slightly from the original color.
| Carrier plate: | Queenply with 11 layers (15 mm thickness) |
|---|---|
| Format: | 244 × 122 cm |
| Thickness: | 16,4 mm |
| Weight: | 22,18 kg |
| Coating: | HPL |
| Surface: | Pearl matt |
You can get the Queenply Multiplex fig-purple on a carrier panel in 15 mm or 18 mm thickness from us. The HPL processed on both sides in 0.7 mm thickness is of course of the same color. Very important: We do not process CPL or melamine. Carrier panel and HPL are glued together in a moisture-resistant manner. We use a special PUR hotmelt process for this, so that the Queenply is waterproof.
Due to its low weight of approx. 320 - 350 kg/m3, our Queen is the lightest finishing panel on the market and therefore easier to process than other plywood and multiplex boards.
As with all our multiplex panels, this Queenply surface is resistant to pressure and scratches and is easy to clean.
We achieve the low thickness tolerance through calibration accurate to 0.2 mm.
The multiplex construction gives you a panel with high screw pull-out resistance and particularly good stability. No screw will come loose.
Plywood-multiplex panels like the Queenply Multiplex fig-purple do not have the same surface properties as chipboard or MDF beams. Any surface irregularities that may occur are in the nature of the carrier and are no reason for a complaint. Production or material-related minimal defects, which do not affect the product quality and are permissible within the 1st choice, are assessed according to the grading rules based on DIN EN 438 and the international ISO standardization.
We also take great care that your ordered Queenply panels leave our factory perfectly and arrive undamaged. You can rely on that! However, we would also like to point out that any distortion of the boards caused by transport or further storage is not a reason for complaint.
If you process our lightweight panels, please ensure that you take adequate safety precautions, such as extracting the chips and wearing safety goggles and a protective mask. Due to the low weight, the processing of Queenply results in increased dust formation.
And one more important note:
We pack your finishing panels with extra care before shipping and make sure they leave our warehouse without damage to the edges. However, even with the greatest care, it can happen during transport that a corner is pressed in or the edge is slightly damaged. We know that too. That's why we calculate 1 cm less for each side of every Queenply finishing panel in advance: 249 cm × 121 cm for the raw panel, 243 cm × 121 cm for all composite elements and 247 cm × 120 cm for all veneered panels. This saves us all a lot of time that would otherwise be wasted on complaints. Put this time into your project - and recommend us to others.