€257.77*
Available, delivery time: 1–3 weeks (delivery in even calendar week in BE, FR, LU, NL)
Queenply. The original
- extremely light — extremely stable
- carrier board with 9 layers (thickness 12 mm)
- waterproof thanks to Kaurit gluing
- calibrated to an accuracy of 0.2 mm
- made from sustainably grown wood
Oak veneer. Natural look for your extension. In many thicknesses.
Forget "rustic oak" and look at our lightweight panel with oak veneer! The wood radiates a homely coziness, the look is simply timeless, and the high-quality veneer can be combined in many ways. Are you looking for the same style for your mobile home on wheels or another wooden project? No problem. We offer our lightweight board with European oak veneer in various thicknesses.
The high-quality surface is pre-treated with a caring oil, so that the veneer is additionally moisture-regulating and gets a noble look. The base material is of course Queenply with its low weight of approx. 320 – 350 kg/m3. The applied veneer is about 50% lighter than HPL.
For beautiful wall and ceiling paneling in vans or yachts, we have this multiplex in 4mm thickness with veneer on one side in our range. For your furniture construction, you can buy lightweight boards veneered on both sides in 12 mm, 15 mm or 18 mm here in the shop.
| Carrier plate: | Queenply with 9 layers (12 mm thickness) |
|---|---|
| Format: | 248 × 121 cm |
| Thickness: | 13 mm |
| Weight: | 14,34 kg |
| Coating: | Veneer |
Queenply Multiplex European Oak has the same good technical properties as all other lightweight boards in our shop.
The gluing is MR (moisture resistant).
We calibrate also all lightweight panels to 0.2 mm to obtain a better surface smoothness and a lower thickness tolerance.
The multiplex construction of the boards ensures high screw pull-out resistance and particularly good staying power.
The applied veneer is up to 50% lighter than HPL, which saves removal weight and thus fuel.
Plywood multiplexture beams such as the Queenply with oak veneer do not have the same surface properties as chipboard or MDF beams. Any surface irregularities that may occur are in the nature of the substrate and are not grounds for complaint.
We also take great care to ensure that your ordered Queenply panels leave our factory in perfect condition and arrive undamaged. You can rely on that! However, we would also like to point out that any distortion of the boards caused by transport or further storage is not grounds for complaint.
As you may already know, veneers are a natural product made of wood and are therefore always unique. That is what makes them so unique. However, this is also the reason why our veneers shown in the shop are only exemplary representations and slightly deviating surfaces are also in the nature of things. Please take this into account in your planning and selection.
When processing the veneer, please ensure that you take adequate safety precautions, such as extracting the chips and wearing safety goggles and a protective mask.
Due to the low weight of the Queenply, there is an increased dust formation during processing.
And another important note: We pack your finishing panels with special care before shipping and make sure that they leave our warehouse without any damage to the edges. However, even with the greatest care, it can happen during transport that a corner is pressed in or the edge is slightly damaged. We know that too. That’s why we calculate 1 cm less for each side of every Queenply finishing panel in advance: 249 cm × 121 cm for the raw panel, 243 cm × 121 cm for all composite elements and 247 cm × 120 cm for all veneered panels. This saves us all a lot of time that would otherwise be wasted on complaints. Put this time into your extension – and feel free to recommend us to others.
You are interested in the Queenply coated on one side? A good choice! However, we would like to point out that these panels can tend to warp slightly due to the one-sided coating and the associated asymmetrical structure.
Even we cannot change this. Therefore, a possible warpage is not a reason for complaint.
Maintenance Oil
