€268.37*
Available, delivery time: 1–3 weeks (delivery in even calendar week in BE, FR, LU, NL)
Queenply. The original
- extremely light — extremely stable
- carrier board with 9 layers (thickness 12 mm)
- waterproof thanks to Kaurit gluing
- calibrated to an accuracy of 0.2 mm
- made from sustainably grown wood
Lightweight panels with ash veneer. Chic surface. Perfect for walls, ceilings, furniture.
There’s something about ash wood! Its grain and color make it simply perfect as a decorative veneer. It can be combined with many other colors and surfaces, for example with one of our color-intensive acrylic decors. There are no limits to your creativity.
And did you know that? Ash wood is a hard wood. Its bending strength exceeds that of oak. It is elastic, abrasion-resistant and tougher than most of our domestic wood species due to its high breakability. Sounds good for van interiors too, doesn’t it?
So, it’s no wonder that we have also developed a Queenply veneer from it: in various thicknesses, veneered on one or both sides. Just as you wish.
But it’s not only the exterior that counts. The technical values also count. You can find all the information you need right here under "Technical details".
| Carrier plate: | Queenply with 9 layers (12 mm thickness) |
|---|---|
| Format: | 248 × 121 cm |
| Thickness: | 13 mm |
| Weight: | 14,82 kg |
| Coating: | Veneer |
The weight of the Queenply Ash carrier panel remains unbeatable: approx. 320 – 350 kg/m³, depending on the thickness. The veneer is also around 50 % lighter than HPL. We achieve the high screw pull-out resistance and the particularly good stability through the multiplex construction – this makes working on your van interior easier for you.
Our 4 mm Queenply with ash veneer is veneered on one side. You can use this lightweight panel for your wall and ceiling panelling. On the other hand, Queenply ash veneered on both sides in a higher thickness ( 13 mm, 16 mm, 19 mm) is ideal for furniture construction.
We calibrate the carrier panels to 0.2 mm, which reduces the thickness tolerance and ensures a better surface smoothness.
The gluing is MR (moisture resistant).
The veneer is moisture-regulating. It absorbs moisture better and releases it again later. This optimises the indoor climate in the camper. This lightweight board is therefore not only suitable for motorhome conversion, but also for the interior finishing of yachts and ships.
You are interested in the Queenply coated on one side, because you can cover ceilings and walls with it really stylish?
A good choice! However, we would like to point out that these panels can tend to warp slightly due to the one-sided coating and the associated asymmetrical structure.
Even we cannot change this. Therefore, a possible warpage is not a reason for complaint.
Plywood multiplexture beams such as the Queenply with ash veneer do not have the same surface properties as chipboard or MDF beams. Any surface irregularities that may occur are in the nature of the substrate and are not grounds for complaint.
We also take great care to ensure that your ordered Queenply panels leave our factory in perfect condition and arrive undamaged. You can rely on that! However, we would also like to point out that any distortion of the boards caused by transport or further storage is not grounds for complaint.
As you may already know, veneers are a natural product made of wood and are therefore always absolutely unique. That is what makes them so unique. However, this is also the reason why our veneers shown in the shop are only exemplary representations and slightly deviating surfaces are also in the nature of things. Please take this into account in your planning and selection.
When processing the veneer, please ensure that you take adequate safety precautions, such as extracting the chips and wearing safety goggles and a protective mask.
Due to the low weight of the Queenply, there is an increased dust formation during processing.
And another important note: We pack your finishing panels with special care before shipping and make sure that they leave our warehouse without any damage to the edges. However, even with the greatest care, it can happen during transport that a corner is pressed in or the edge is slightly damaged. We know that too. That’s why we calculate 1 cm less for each side of every Queenply finishing panel in advance: 249 cm × 121 cm for the raw panel, 243 cm × 121 cm for all composite elements and 247 cm × 120 cm for all veneered panels. This saves us all a lot of time that would otherwise be wasted on complaints. Put this time into your extension – and feel free to recommend us to others.
Maintenance Oil
