€7.89*
This product or format is actually not available. We're getting supplies right now.
For clean cuts without fraying. Especially suitable for real wood veneers.
This jigsaw blade should be standard for the processing of your real wood veneer panels. Due to the special, progressive arrangement of the saw teeth, it is perfectly suitable for all our panels with real wood veneer, because the cut edges do not fray due to this characteristic.
You can work with all Queenply thicknesses and all veneer variants. The only rule here - as with all other saw blades - is that a fresh, sharpened saw blade naturally cuts best. Therefore, make sure that you always use a sharp saw blade when processing your Queenply. Basically, the saw blade is of very high quality, so you can expect a long service life.
It fits jigsaws with a T-shaft and has a working length of 75 mm.
The Allrounder jigsaw blade is suitable for all jigsaws with T-shaft mount.
- Working length: 75 mm
- Material thickness min./max: 3 – 30 mm
- Tooth pitch: 2.7 mm (progressive)
- Recording jigsaw blade: T-shaft
- length: 100 mm
- Finish: free-angle-tooth ground
You can order this saw blade as a set of 3 pieces in our store.
Before you start processing our lightweight panels, please ensure that you take adequate safety precautions, such as wearing protective goggles and a face mask. It is also advisable to use an exhaust system for the chips, as the lower weight of our queen results in increased dust generation during processing.
When sawing, it is generally advisable not to start sawing until the saw has reached the correct speed (for circular saws: number of revolutions).
Especially with our coated panel materials, the ambient temperature is important during processing. Therefore, make sure that the room temperature is comfortable when you start.
You can also get more information on the manufacturer's website.