imi-rust precious rust (MDF panel)
Product information "imi-rust precious rust (MDF panel)"
Decor 341. Rust coating on MDF panel. Mineral design surface. Slightly magnetic. Robust. Ecologically harmless.
A rather special surface, don't you think? But you have to admit: As a design element for interior fittings, this is a real eye-catcher. Especially because this design coating is indistinguishable from an original iron plate. The imitation is deceptively real.
The mineral surface contains a real metallic iron layer and is therefore also slightly magnetic. The 3D stainless steel structure has a special effect.
Incidentally, the entire material is ecologically harmless and recyclable. Would you prefer this surface to be rolled out? No problem. We can also offer you this surface on a flexible bio-polyurethane mat, certified with the German label “Blue Angel”.
No matter which carrier panel you choose: You can use it to tackle interior fittings in offices, commercial and residential spaces or even on an exhibition stand.
There is of course some technical information. Read through it at your leisure.
| Format: | 260 × 101 cm |
|---|---|
| Weight: | 42,016 kg |
| Coating: | Rust |
| Veneer/Decor: | imi-rost |
Structure and surface
This MDF panel with a imi-rust coating in a precious rust structure is a 19 mm thick MDF carrier panel plus an approx. 1 mm thick mineral, slightly magnetic rust coating on one side (side A).
Side B is covered with a white melamine backing. The panel edges are raw.
Due to the mineral coating on one side, these MDF panels are subject to slight tension.
The rust characteristic has no unwinding. The coating consists of mineral, solid-colored material and a proportion of metallic iron particles, so that the surface is slightly magnetic. The surface behaves like Corten steel.
A special surface sealant protects against discoloration. This makes the coating both durable and robust. However, the product is of course also subject to normal ageing processes.
Panel dimensions
2600 mm × 1010 mm
3030 mm × 1200 mm
Special formats / optimised dimensions on request
Thickness
You can order this MDF panel in approx. 20 mm thickness from our online shop. We will of course deliver it with our shuttle service.
Classification
The mineral coating is classified as non-combustible A2-s1, d0 in accordance with the German DIN EN 13501-1.
Nachhaltigkeitsvorteil
This product is recyclable. You can therefore dispose of leftovers with household waste without any problems. Both, the coating and the material of the carrier panel, are ecologically harmless.
Higher loads
An additional matt protective coating is recommended for expected higher loads.
Cleaning and care
You can treat this rusty surface like a normal veneered, lacquered surface. We recommend cleaning with a damp cloth.
Normal carbide-tipped tools are sufficient for further processing of these high-quality coated MDF panels (sawing, drilling, routing).
The screw extraction resistance is the same as for any other MDF panel. We recommend pre-drilling.
These panels can be glued with standard wood glue.
Please store these panels in a dry place and protect them from frost. Please use foam foil as an intermediate layer so that you can enjoy this beautiful design coating for a long time.
And please note the following information:
The main component of imi mineral coatings is organic. This means that color differences between different batches cannot be completely ruled out, even if we pay close attention to them. Differences of this kind, as well as air inclusions, are natural and are no reason for complaint. A slight distortion and slight offsets in the joint area cannot be completely ruled out due to the nature of the material, despite all the precision in production and caution on our part.