imi-rust diamond (MDF panel)
Product information "imi-rust diamond (MDF panel)"
Decor 331. Rust look with diamond pattern. Perfect imitation of real iron plates. Slightly magnetic. Ecologically safe.
Here's something unusual again: this mineral rusty surface with a diamond pattern. Fortunately not as a real iron plate, but made for carpentry and joinery work. You can order this surface on MDF panel: much more flexible to use and easier to work with. It looks really smart in combination with wooden surfaces or an imi-beton surface.
We have already seen some really great combinations in interior design, shop fitting or trade fair stands. The incorporated real iron particles make this design surface look like the original. And it is also slightly magnetic.
You can use these panels in furniture construction, as wall panelling, on ceilings or on stairs. Very important: the entire material is ecologically safe. The surface is specially sealed to prevent discoloration. This has also been considered.
Want to take a look at more technical information? With pleasure! Take a look at the technical details.
| Format: | 260 × 101 cm |
|---|---|
| Weight: | 42,016 kg |
| Coating: | Rust |
| Veneer/Decor: | imi-rost |
Structure and surface
The imi-rust composite panel with a diamond structure consists of a 19 mm thick MDF carrier panel with a 1 to 3 mm thick mineral coating on one side in a rust look (side A).
Side B is covered with a white melamine backing. The panel edges are raw.
Due to the mineral coating on one side, these MDF panels are subject to slight tension. The rust characteristic has no unwinding. The coating consists of mineral, solid-colored material with a proportion of metallic iron particles, so that the surface is slightly magnetic. The surface behaves like Corten steel. A special surface sealant protects against discoloration. This design surface is therefore durable and robust, but is of course also subject to normal ageing processes.
Each panel coated in this way is unique. However, we always ensure a uniform appearance.
Panel dimensions
2600 mm × 1010 mm
3030 mm × 1200 mm
Special formats / optimised dimensions on request
Thickness
You can order this composite panel in approx. 20 mm thickness from our online shop.
Classification
The mineral rust coating is classified as non-combustible A2-s1, d0 in accordance with the German DIN EN 13501-1.
Sustainability advantage
This product is recyclable. You can easily dispose of leftovers with household waste. Both, the coating and the material of the carrier panel are ecologically harmless.
Higher loads
An additional matt protective coating is recommended if it is expected to be subjected to higher loads.
Cleaning and care
You can treat this rusty surface like a normal veneered, lacquered surface. We recommend cleaning with a damp cloth.
Normal carbide-tipped tools are sufficient for further processing of these high-quality coated MDF panels (sawing, drilling, routing).
The screw extraction resistance is the same as for any other MDF panel. We recommend pre-drilling.
These panels can be glued with standard wood glue.
Please store these panels in a dry place and protect them from frost. Please use corrugated cardboard or foam film as intermediate layers so that you can enjoy this beautiful design coating for a long time.
And please note the following information:
The main component of imi mineral coatings is organic. This means that color differences between different batches cannot be completely ruled out, even if we pay close attention to them. Differences of this kind, as well as air inclusions, are natural and are no reason for complaint. Due to the nature of the product, slight warping and slight offsets in the joint area cannot be completely ruled out – despite all the precision in production and caution on our part.