imi-old timber design oak planked (MDF panel)
Product information "imi-old timber design oak planked (MDF panel)"
Decor 437. Design surface in planked oak. On MDF panel. Non-combustible and splinter-free.
We already have a real oak veneer for our Queenply. And it has many fans. Now we're adding another oak decor: Planked oak on an MDF panel. For all lovers of classic oak wood.
The advantage: this decor is not real wood, but a mineral, environmentally friendly coating. Made by the absolute specialists in this field: imi surface design.
This designer wood surface looks deceptively real and also feels amazingly real thanks to the 3D depth structure. It can be used to design and build many interior solutions, especially in shop and trade fair construction or in living spaces. Clad walls, for example, look really great with it. Or floors.
The panels are very easy to work with, using conventional carpentry tools. Without worrying about wood splinters: the decor is splinter-free and, incidentally, non-flammable.
Further detailed information on structure, care and panel formats can be found in the technical details.
Structure and surface
This MDF panel imi-old timber design oak planked consists of a 19 mm thick MDF carrier panel with an approx. 1 mm to 5 mm thick oak designed mineral coating on one side (side A).
Side B is covered with a white melamine backing. The panel edges are raw.
Due to the mineral coating on one side, these MDF panels are subject to slight tension.
The decor is made of mineral, solid-colored material. This design surface is extremely durable and robust, but is of course also subject to normal ageing processes.
Panel dimension
3030 mm × 1200 mm
Special formats / optimised dimensions on request
Stärke
You can order this MDF panel in approx. 20 mm to 25 mm thickness from our online shop.
Classification
The mineral coating is classified as non-combustible A2-s1, d0 in accordance with the German DIN EN 13501-1.
Sustainability advantage
This product is recyclable. You can therefore dispose of leftovers with household waste. Both, the coating and the material of the carrier panel are ecologically harmless.
Higher loads
An additional matt protective coating is recommended for expected higher loads.
Cleaning and care
You can treat this surface like a normal veneered, lacquered surface. We recommend cleaning with a damp cloth.
Normal carbide-tipped tools are sufficient for further processing of these high-quality coated MDF panels (sawing, drilling, routing).
The screw extraction resistance is the same as for any other MDF panel. We recommend pre-drilling.
These panels can be glued with standard wood glue.
Please store these panels in a dry place and protect them from frost. Please use foam foil as an intermediate layer so that you can enjoy this beautiful design coating for a long time.
And please note the following information:
The main component of imi mineral coatings is organic. This means that color differences between different batches cannot be completely ruled out, even if we pay close attention to them. Differences of this kind, as well as air inclusions, are natural and are no reason for complaint. A slight distortion and slight offsets in the joint area cannot be completely ruled out due to the nature of the material, despite all the precision in production and caution on our part.