imi-old timber design light chopped (MDF panel)
This product or format is actually not available. We're getting supplies right now.
Product information "imi-old timber design light chopped (MDF panel)"
Decor 432. Splinter-free reclaimed wood design. On MDF panel. Guaranteed easy to use. Mineral coating.
Now it's getting cosy! As always, when reclaimed wood is used in interior fittings. But it gets even better: our reclaimed wood is splinter-free and non-combustible.
This design wood surface with its 3D depth structure and a thickness of up to 5 mm looks like real reclaimed wood, but is actually a mineral coating. You can use it - applied to MDF carrier panels - to design walls or ceilings, build furniture or platforms. Simple use in exhibition stand construction and shop fitting is also guaranteed.
And, of course, these design decors are also suitable for laying on the floor. This is where this surface really comes into its own. The surface specialists at imi surface design have made sure that the decor is hard-wearing.
Other advantages: easy to work with, no cutting, no cleaning and insect-free.
Structure and surface
This MDF panel imi-old timber design light chopped consists of a 19 mm thick MDF carrier panel with an approx. 1 mm to 5 mm thick wooden light brown mineral coating on one side (side A).
Side B is covered with a white melamine backing. The panel edges are raw.
Due to the mineral coating on one side, these MDF panels are subject to slight tension.
The decor is made of mineral, solid-colored material. This design surface is extremely durable and robust, but is of course also subject to normal ageing processes.
Panel dimensions
3030 mm × 1200 mm
Special formats / optimised dimensions on request
Thickness
You can order this MDF panel in approx. 20 mm to 25 mm thickness from our online shop.
Classification
The mineral coating is classified as non-combustible A2-s1, d0 in accordance with the German DIN EN 13501-1.
Sustainability advantage
This product is recyclable. You can therefore dispose of leftovers with household waste. Both, the coating and the material of the carrier panel are ecologically harmless.
Higher loads
An additional matt protective coating is recommended for expected higher loads.
Cleaning and care
You can treat this surface like a normal veneered, lacquered surface. We recommend cleaning with a damp cloth.
Normal carbide-tipped tools are sufficient for further processing of these high-quality coated MDF panels (sawing, drilling, routing).
The screw extraction resistance is the same as for any other MDF panel. We recommend pre-drilling.
These panels can be glued with standard wood glue.
Please store these panels in a dry place and protect them from frost. Please use foam foil as an intermediate layer so that you can enjoy this beautiful design coating for a long time.
And please note the following information:
The main component of imi mineral coatings is organic. This means that color differences between different batches cannot be completely ruled out, even if we pay close attention to them. Differences of this kind, as well as air inclusions, are natural and are no reason for complaint. A slight distortion and slight offsets in the joint area cannot be completely ruled out due to the nature of the material, despite all the precision in production and caution on our part.