imi-metal brass (MDF panel)
Product information "imi-metal brass (MDF panel)"
Decor 748. Brass decor on MDF panel. Perfect reproduction for carpentry and joinery work.
Admittedly: This decor also joins the ranks of the slightly unusual surfaces. Precious metal on wooden carrier panel. More precisely: imitation brass on an MDF panel.
With the large selection of metallic surfaces, there are (no longer) any limits to your creativity. Now you can also design great things in metal for interior fittings as a joiner or carpenter.
The brass decor reproduction is mineral and visually indistinguishable from solid metal. The slight gloss of original brass is also perfectly reproduced. Once again, the surface specialists at our cooperation partner imi surface design have done their best.
Incidentally, you can work and process the panels in the same way as all other MDF panels: with carpentry tools. You don't need to be trained in metal construction. Further technical information can be found under "Technical details".
If you already like the decor, why not take a look at the other metal coatings? We have a whole range of metal decors in our shop. All on MDF panels. And all perfect imitations of real metal.
| Format: | 260 × 101 cm |
|---|---|
| Weight: | 42,016 kg |
| Coating: | Metal |
Structure and surface
The imi-metal brass MDF panel is a 19 mm thick MDF carrier panel with an approx. 1 mm thick mineral decor coating on one side (side A).
Side B is covered with a white melamine backing. The panel edges are raw.
Due to the mineral coating on one side, these MDF panels are subject to slight tension.
The design surface consists of mineral, solid-colored material that is coated with a matt lacquer. It is extremely durable and robust, but is of course also subject to normal ageing processes.
Panel dimensions
2600 mm × 1010 mm
3030 mm × 1200 mm
Special formats / optimised dimensions on request
Thickness
You can order this composite panel in approx. 20 mm thickness from our online shop.
Sustainability advantage
This product is recyclable. You can easily dispose of leftovers with household waste. Both, the coating and the material of the carrier panel are ecologically harmless.
Higher loads
An additional matt protective coating is recommended if it is expected to be subjected to higher loads.
Cleaning and care
You can treat this imi-beton surface like a normal veneered, lacquered surface. We recommend cleaning with a damp cloth.
Normal carbide-tipped tools are sufficient for further processing of these high-quality coated MDF panels (sawing, drilling, routing).
The screw pull-out resistance is the same as for any other MDF panel. We recommend pre-drilling.
These panels can be glued with standard wood glue.
If you put the panels into storage, please store them in a dry place and protect them from frost. Please use foam foil as an intermediate layer so that you can enjoy this beautiful coating for a long time.
And please note the following information:
The main component of imi mineral coatings is organic. This means that color differences between different batches cannot be completely ruled out, even though we take great care to avoid them. Differences of this kind, as well as air inclusions, are natural and are no reason for complaint. Due to the nature of the product, slight warping and slight offsets in the joint area cannot be completely ruled out – despite all the precision and care we take.