imi-concrete timber formwork (MDF panel)
Product information "imi-concrete timber formwork (MDF panel)"
Decor 122. Original imi design surface. Concrete-look timber formwork. On MDF core panel.
Original timber formwork looks really stylish, but is also quite expensive to produce. That's why there are already so many imitation design surfaces, but this one probably tops most of them. Why? Because you can't distinguish it from real timber formwork due to its structure, texture and feel. The surface specialists at imi surface design have really done a great job here.
You can order this mineral surface, which is also ecologically harmless, on an MDF core panel from us. Quick and easy to work with the usual carpentry tools you are familiar with.
Do you already have an idea of what you can build with it? We've already seen some really great interior fittings, platforms and shop fittings.
A few initial facts: The mineral surface is approx. 1 mm thin. It is applied to one side of the MDF panel. The back of the panel is covered with a white melamine. This results in a total panel thickness of 20 mm.
Further information can be found in the technical details. Before processing, please also note the important information that we have also compiled for you.
Structure and surface
The MDF panel imi-concrete timber formwork that we offer you in our shop consists of a 19 mm thick MDF carrier panel with an approx. 1 mm thick grey mineral coating on one side (side A).
Side B is covered with a white melamine backing. The panel edges are raw.
Due to the mineral coating on one side, these MDF panels are subject to slight tension.
The surface is made of mineral, solid-colored material that is coated with a matt lacquer. It is extremely durable and robust, but is of course also subject to normal ageing processes.
Panel dimensions
2600 mm × 1010 mm
3030 mm × 1200 mm
Special formats / optimised dimensions on request
Thickness
You can order this composite panel from imi in a thickness of approx. 20 mm from our online shop.
Classification
The mineral imi-beton coating is classified as non-combustible A2-s1, d0 in accordance with the German DIN EN 13501-1.
Sustainability advantage
The materials are recyclable. You can easily dispose of them with household waste. Both, the coating and the carrier panel material, are ecologically harmless.
Higher loads
An additional matt protective coating is recommended for expected higher loads.
Cleaning and care
You can treat this surface like a normal veneered, lacquered surface. We recommend cleaning with a damp cloth.
As you may have already read, normal carbide-tipped tools are sufficient for sawing, drilling and routing these high-quality coated MDF panels.
The screw extraction resistance is the same as for any other MDF panel. We recommend pre-drilling.
These panels can be glued with standard wood glue.
If you put the panels into storage, please store them in a dry place and protect them from frost. Please use foam foil as an intermediate layer so that you can enjoy this beautiful coating for a long time.
And please note the following information:
The main component of imi mineral coatings is organic. This means that color differences between different batches cannot be completely ruled out, even though we take great care to avoid them. Differences of this kind, as well as air inclusions, are natural and are no reason for complaint. Due to the nature of this product, slight warping and slight offsets in the joint area cannot be completely ruled out, despite all the precision and care we take.