imi-asphalt (MDF panel)
Product information "imi-asphalt (MDF panel)"
Decor 621. Asphalt look for interior fittings. Perfect imitation on a mineral basis. Resilient and robust.
Sure, you know asphalt from road construction. What if you could also use it for interior fittings? All you need are these MDF panels, not an asphalt paver.
The asphalt structure with three-dimensional depth structure turns every interior design to something special, right? Especially because you can't distinguish it from real asphalt. The mineral-based imitation looks and feels like asphalt.
Thanks to a special surface sealant, the design surface is very robust and resilient. You can therefore use these tiles for floors and walls, stairs or landings.
And you'll maybe also be interested to know that the material is easy and time-saving to work with. Standard carpentry tools are all you need.
By the way: We also offer this surface on a flexible bio-polyurethane mat. Asphalt for rolling out. You can also use it to cover columns or curves.
You can find out more about this design surface, its environmental compatibility and its structure in the technical details.
Structure and surface
This imi-asphalt MDF panel consists of a 19 mm thick MDF carrier panel with an approx. 1 mm thick asphalt-grey mineral coating on one side (side A).
Side B is covered with a white melamine backing. The panel edges are raw.
Due to the mineral coating on one side, these MDF panels are subject to slight tension.
The asphalt surface is made of mineral, solid-colored material that is coated with a matt lacquer. It is extremely durable and robust, but is of course also subject to normal ageing processes.
Panel dimensions
2600 mm × 1010 mm
3030 mm × 1200 mm
Special formats / optimised dimensions on request
Thickness
You can order this composite panel in approx. 20 mm thickness in our online shop.
Classification
The mineral imi-asphalt coating is classified as non-combustible A2-s1, d0 in accordance with the German DIN EN 13501-1.
Sustainability advantage
This product is recyclable. You can easily dispose of leftovers with household waste. Both, the coating and the material of the carrier panel are ecologically harmless.
Higher loads
An additional matt protective coating is recommended if it is expected to be subjected to higher loads.
Cleaning and care
You can treat this imi-beton surface like a normal veneered, lacquered surface. We recommend cleaning with a damp cloth.
Normal carbide-tipped tools are sufficient for further processing of these high-quality coated MDF panels (sawing, drilling, routing).
The screw pull-out resistance is the same as for any other MDF panel. We recommend pre-drilling.
These panels can be glued with standard wood glue.
If you put the panels into storage, please store them in a dry place and protect them from frost. Please use foam foil as an intermediate layer so that you can enjoy this beautiful coating for a long time.
And please note the following information:
The main component of imi mineral coatings is organic. This means that color differences between different batches cannot be completely ruled out, even though we take great care to avoid them. Differences of this kind, as well as air inclusions, are natural and are no reason for complaint. Due to the nature of the product, slight warping and slight offsets in the joint area cannot be completely ruled out – despite all the precision and care we take.