For large-area, strong adhesive bonds. Elastic and temperature resistant. For interior and exterior use.
This SMP-based adhesive sealant is very suitable for large-area, strong adhesive joints of the Queenply. Due to its elasticity, the adhesive compensates for the expansion of different materials, this adhesive sealant can also compensate for vibrations.
You can use it not only indoors, but also outdoors if necessary, it is even used in assembly bonding of solar panels or staircase construction. We believe: Then it also fits perfectly to your Queenply project. The adhesive sealant is UV, weather and extremely temperature resistant.
Under “Technical Details” we have summarized further important product informations for you.
The SMP adhesive sealant XTREME is really well suited for assembly bonding in vehicle, car body, caravan, ship and interior finishing, because it adheres really well to a wide variety of materials.
Take a closer look at the product details:
Content: 290 ml
Container: cartridge
Chemical base: silane-modified polymer
Color: white
Skin forming time min./max.: 20-25 min
Density / condition: 1.54 g/cm³ / at 20°C
Curing speed / condition: 4 mm/d / 20°C and 50% relative humidity
Working temperature min./max.: 5 to 40 °C
Temperature resistance min./max.: -40 to +100 °C
Tensile strength min.: 2.6 N/mm²
Tensile shear strength min.: 3 N/mm²
Elongation at break min.: 350
Shelf life from manufacture / condition: 18 months / at 15°C to 25°C
Silicone-free: yes
Solvent free: yes
PVC free: yes
Isocyanate free: yes
You can order the SMP adhesive sealant XTREME from us by the cartridge.
Before you start sealing and bonding work on your queenply, please make sure that the substrates are clean, dry and free of grease. Please also carefully read and follow the processing instructions on the packaging and the cartridge.
And basically it is important to us: Before you start with the further processing and the finishing work on our lightweight panels, please make sure that you take sufficient work safety measures such as wearing protective goggles and, if necessary, a mouth guard. For drilling or sawing work, it is advisable to additionally wear hearing protection.
Especially with our coated panel materials, the ambient temperature is important during processing. Therefore, make sure that the room temperature is comfortable when you start.
Further information on the PU sealant and adhesive can be found on the manufacturer's website, as well.