Rubio® Monocoat Oil Plus 2C Smoke 5%
Product information “Rubio® Monocoat Oil Plus 2C Smoke 5%”
Two-component oil for your panels. With a subtle tint. Only one coat needed. Very economical and high-quality.
You may have already looked at “Smoke” as a color option. This variant is the diluted version. It gives wood surfaces an almost invisible finish with a subtle, light, translucent shade of gray. In short: an all-purpose paint for many types of wood.
It also provides high-quality protection for all wood surfaces. This plant-based 2C oil from Rubio® protects, nourishes, and tints the wood with just a single application. You can use it indoors without hesitation – it’s VOC-free. You can use it for all veneers, raw panels and exposed edges. For more color options, feel free to check out all other maintenance oils in our shop.
Why choose Rubio® wood care oil?
- All-round wood protection with just one coat: saves money
- Tints and protects in a single step: saves time
- Natural ingredients: better for your health
- 0% VOC (according to Indoor Air Comfort Gold-Label): for a better indoor climate
- No water. No solvents
- High coverage: 30–50 m²/L
- Recommended by professionals
- Perfectly suited to our panels
- Easy to apply with a sponge or pad (also available from our shop)
This oil is suitable for indoor wooden surfaces: floors, ceilings, furniture, stairs, table tops and worktops. It is also suitable for high-traffic areas. The two components ensure a high level of protection. The tint really brings out the best in the wood. You can find further information in the technical details.
Why is wood care oil so important?
Whatever you build with our panels is always right at the heart of things: on the road, in residential settings, in exhibition stands, below deck – as a piece of furniture, a worktop, a floor or a wall.
- High-quality wood care oil makes the wood more durable.
- It protects the wood from nicks, scratches and mechanical damage.
- Proper wood care ensures that the surface remains as beautiful as it was when new.
In comparison to many other wood care oils, this Rubio oil requires just a single application to provide optimal protection for your panels. We have been working with Rubio for quite some time now – their oils are perfectly suited to our wooden panels.
The 2C combination of oil and accelerator ensures high-quality protection that cures quickly. Thanks to its molecular bonding, the care oil bonds with the top microns of the wood within a few minutes, which means for you: no streaks or overlaps, no film formation, no saturation. This unique technology has further convinced us to recommend this oil to you.
Pack sizes
390 ml
1,3 L
Introductions for use
Rubio Oil Plus 2C is applied using pads or a sponge. To ensure the best possible finish, we also stock the right accessories for you in our shop (Rubio Monocoat Scrubby Pads). Depending on whether you apply the oil by hand or using a machine, there are different pads to choose from. Thanks to their special texture, these ensure that the oil can be applied quickly and easily and penetrates deep into the wood.
Rubio cotton cloths are ideal for removing excess oil after surface treatment. Lint-free and made from old cotton textile scraps (e.g. T-shirts), which are thus reused and help reduce textile waste. Thanks to their soft and absorbent properties, these cloths are ideal for evenly distributing and wiping off wood oil without leaving any lint behind.
Technical information
Working time: max. 4–6 hours after mixing components A and B
Drying time: 12 – 24 hours
Curing time: 5 days (80% after 2 days)
Yield: 30 – 50 m2 / L
Application temperature: 8 – 30 °C
Humidity during use: 35% – 60%
Wood moisture content: 8% – 12%
Storage
min. + 5°C, max. + 30 °C (frost-free!)
If stored in a dry place and in its original packaging, the product has a shelf life of 36 months.
Surface cleaning
After 2 days at the earliest: dry cleaning (vacuuming)
After 5 days at the earliest: Clean with water and Surface Care, All Natural Wood Cleaner or All Natural Wood Cleaner Spray
Refurbishment / Renewal
Over time, treated wooden surfaces may well show signs of wear and tear. Signs of this include, for example, visible footpaths on the floor or a surface that is more prone to staining and remains damp for longer after cleaning. If you notice this, if the surface is very worn or if the color needs refreshing, you can touch it up with a new coat of Oil Plus 2C in the same color as the original treatment. Provided your worktop has no other major damage, you won’t need to sand the surface again.
You can read here about how a revision works:
Mix correctly! The 3:1 mixing ratio of oil (Component A) to hardener (Component B) is crucial. Only then will the oil cure completely and provide full protection against moisture, dirt and UV radiation. At the same time, the correct mixing ratio ensures an even color finish and a stable, durable surface. If you don’t take care to do this properly, you risk ending up with dull patches, stains or having to redo the job.
Warning!
Oil-soaked cloths or other application tools pose a fire hazard. The oxidation of the oil generates heat, which can cause the materials to spontaneously ignite. Therefore, cloths and other tools must be soaked in water for a while after use before you dispose of them.
Test the color! The color images in our shop are for illustrative purposes only and may not accurately reflect how the color will look on your surface. We therefore recommend that you test the color on a small section of the surface first.
After application, the surface may have a slight sheen. However, this will disappear after 2–3 cleaning cycles with Surface Care, All Natural Wood Cleaner or All Natural Wood Cleaner Spray. You can find all these products in our shop.
Wear work gloves. Even though Rubio oils contain only environmentally friendly ingredients, they can still cause allergic reactions in some people. It is therefore best to wear gloves when applying the oil.
Login