€349.38*
** You will receive a discount of 2.5% on orders of 5 or more plates from our entire range. For orders of 30 plates or more, the discount is even 10%.
Available, delivery time: 1–3 weeks (delivery in even calendar week)
There will be no more supplies for this product in the future.
Queenply. The original
- extremely light — extremely stable
- carrier board with 11 layers (thickness 15 mm)
- Veneer: waterproof Kaurit gluing
- calibrated to an accuracy of 0.2 mm
- made from sustainably grown wood
Walnut veneer. Plywood multiplex support. Noble look. Great finishing wood.
Great dark and even coloring, pupur-brown shading, noble grain, high-quality look: this is American walnut. And now imagine this veneer in your van – wow! Or in the interior design of a yacht or used for furniture extensions - wow again! American walnut is highly valued throughout Europe as a finishing wood.
If you can imagine this decor in your motorhome and feel comfortable in it, then we have the right lightweight panel for you: Queenply Multiplex with American walnut veneer, in different thicknesses.
The basis of this construction panel is Queenply with its low weight of approx. 320-350 kg/m³, the high screw pull-out resistance and the particularly good stability. We achieve this through the multiplex construction, which makes it easier for you to work on your project.
By the way, the veneer is moisture-regulating, ideal for the fluctuating climate conditions in a camper or boat.
Would you like some more product information? Then take a quick look at the technical details.
Carrier plate: | Queenply with 11 layers (15 mm thickness) |
---|---|
Format: | 248 × 121 cm |
Thickness: | 16 mm |
Weight: | 18,24 kg |
Coating: | Veneer |
Queenply Multiplex with walnut veneer is a plywood panel that is good for camper interior.
The carrier panel is calibrated to 0.2 mm, which results in a better surface smoothness and a lower thickness tolerance.
The veneers on one side are perfect for walls and ceilings. Multiplex panels veneered on both sides based on a carrier panel in thickness of 15 mm or 18 mm are the ideal panels for furniture construction. The gluing is MR (moisture resistant) in all cases.
The veneer is about 50% lighter compared to an HPL coating.
Queenply with walnut veneer is suitable for the interior finishing of motorhomes as well as yachts and ships due to its moisture-regulating properties.
You are interested in the Queenply coated on one side, because you can cover ceilings and walls with it really stylish?
A good choice! However, we would like to point out that these panels can tend to warp slightly due to the one-sided coating and the associated asymmetrical structure.
Even we cannot change this. Therefore, a possible warpage is not a reason for complaint.
Plywood multiplexture beams such as the Queenply with walnut veneer do not have the same surface properties as chipboard or MDF beams. Any surface irregularities that may occur are in the nature of the substrate and are not grounds for complaint.
We also take great care to ensure that your ordered Queenply panels leave our factory in perfect condition and arrive undamaged. You can rely on that! However, we would also like to point out that any distortion of the boards caused by transport or further storage is not grounds for complaint.
As you may already know, veneers are a natural product made of wood and are therefore always absolutely unique. That is what makes them so unique. However, this is also the reason why our veneers shown in the shop are only exemplary representations and slightly deviating surfaces are also in the nature of things. Please take this into account in your planning and selection. When processing the veneer, please ensure that you take adequate safety precautions, such as extracting the chips and wearing safety goggles and a protective mask.
Due to the low weight of the Queenply, there is an increased dust formation during processing.
And another important note: We pack your finishing panels with special care before shipping and make sure that they leave our warehouse without any damage to the edges. However, even with the greatest care, it can happen during transport that a corner is pressed in or the edge is slightly damaged. We know that too. That’s why we calculate 1 cm less for each side of every Queenply finishing panel in advance: 249 cm × 121 cm for the raw panel, 243 cm × 121 cm for all composite elements and 247 cm × 120 cm for all veneered panels. This saves us all a lot of time that would otherwise be wasted on complaints. Put this time into your project – and feel free to recommend us to others.
You are interested in the Queenply coated on one side? A good choice! However, we would like to point out that these panels can tend to warp slightly due to the one-sided coating and the associated asymmetrical structure.
Even we cannot change this. Therefore, a possible warpage is not a reason for complaint.