€370.35*
** You will receive a discount of 2.5% on orders of 5 or more plates from our entire range. For orders of 30 plates or more, the discount is even 10%.
Available, delivery time: 1–3 weeks (delivery in even calendar week)
Queenply. The original
- extremely light — extremely stable
- carrier board with 11 layers (thickness 15 mm)
- Veneer: waterproof Kaurit gluing
- calibrated to an accuracy of 0.2 mm
- made from sustainably grown wood
Cozy look. Multiplex panel with chestnut veneer. Real wood. In several thicknesses.
A real wood veneer of beautiful chestnut: it looks very cozy. Due to its high resistance to weathering, this wood is also very popular. That is why we also offer it as a veneer on our Queenply Multiplex. Combined with a color decor, the chestnut wood looks even more beautiful, we think.
But of course it's up to you to decide. In any case, we can offer you the lightest carrier panel with a high-quality chestnut veneer for your interior. For your walls and ceilings we have this multiplex in 4 mm thickness, veneered on one side, in our program. You can order thicker panels for your furniture.
It is best to find out more about the technical properties of our Queenply. You can find all the important information here in the product description under “Technical Details”.
Carrier plate: | Queenply with 11 layers (15 mm thickness) |
---|---|
Format: | 248 × 121 cm |
Thickness: | 16 mm |
Weight: | 18,24 kg |
Coating: | Veneer |
The weight of the base support panel of Queenply chestnut remains unbeatable: approx. 320 – 350 kg/m³. The veneer is also about 50% lighter compared to HPL coating. We achieve the high screw pull-out strength and the particularly good staying power through the multiplex construction – which makes it easier for you to work on your van interior.
Our 4 mm Queenply with chestnut veneer is veneered on one side. You can use this lightweight board for your wall and ceiling paneling. On the other hand, Queenply chestnut veneered on both sides in higher thickness is ideal for furniture construction.
We calibrate the carrier panels to 0.2 mm, which reduces the thickness tolerance and ensures a better surface smoothness.
The gluing is MR (moisture resistant).
The veneer is moisture-regulating. It absorbs moisture better and releases it later. This optimizes the indoor climate in the camper. Therefore, this lightweight panel is suitable not only for motorhome finishing, but also for the interior finishing of yachts and ships.
You are interested in the Queenply coated on one side, because you can cover ceilings and walls with it really stylish? A good choice! However, we would like to point out that these panels can tend to warp slightly due to the one-sided coating and the associated asymmetrical structure. Even we cannot change this. Therefore, a possible warpage is not a reason for complaint.
Plywood multiplexture beams such as the Queenply with oak veneer do not have the same surface properties as chipboard or MDF beams. Any surface irregularities that may occur are in the nature of the substrate and are not grounds for complaint.
We also take great care to ensure that your ordered Queenply panels leave our factory in perfect condition and arrive undamaged. You can rely on that! However, we would also like to point out that any distortion of the boards caused by transport or further storage is not grounds for complaint.
As you may already know, veneers are a natural product made of wood and are therefore always unique. That is what makes them so unique. However, this is also the reason why our veneers shown in the shop are only exemplary representations and slightly deviating surfaces are also in the nature of things. Please take this into account in your planning and selection.
When processing the veneer, please ensure that you take adequate safety precautions, such as extracting the chips and wearing safety goggles and a protective mask.
Due to the low weight of the Queenply, there is an increased dust formation during processing.
And another important note: We pack your finishing panels with special care before shipping and make sure that they leave our warehouse without any damage to the edges. However, even with the greatest care, it can happen during transport that a corner is pressed in or the edge is slightly damaged. We know that too. That’s why we calculate 1 cm less for each side of every Queenply finishing panel in advance: 249 cm × 121 cm for the raw panel, 243 cm × 121 cm for all composite elements and 247 cm × 120 cm for all veneered panels. This saves us all a lot of time that would otherwise be wasted on complaints. Put this time into your extension – and feel free to recommend us to others.
You are interested in the Queenply coated on one side, because you can cover ceilings and walls with it really stylish? A good choice! However, we would like to point out that these panels can tend to warp slightly due to the one-sided coating and the associated asymmetrical structure.
Even we cannot change this. Therefore, a possible warpage is not a reason for complaint.