€256.64*
Available, delivery time: 1–3 weeks (delivery in even calendar week in BE, FR, LU, NL)
Queenply. The original
- extremely light — extremely stable
- carrier board with 11 layers (thickness 15 mm)
- waterproof thanks to PUR gluing
- calibrated to an accuracy of 0.2 mm
- made from sustainably grown wood
HPL black matt. Extremely lightweight support panel. For special elegance design.
Color psychologists say that the color black stands for individuality, extravagance and elegance. We have adapted our Queenply decor black matt to this elegance. The surface of the HPL is particularly high-quality, its structure velvety-soft. The matt tone makes the color look elegant. You won’t find that anywhere else, we bet. And your extension project will radiate something unique.
This decor can be combined with other noble HPL or acrylic decors as well as wood veneers.
You think it would suit you and your project? Then go for it! We have this multiplex panel in 15 mm or 18 mm thickness plus HPL for you in our scheme.
| Carrier plate: | Queenply with 11 layers (15 mm thickness) |
|---|---|
| Format: | 244 × 122 cm |
| Thickness: | 16,2 mm |
| Weight: | 22,18 kg |
| Coating: | HPL |
| Surface: | Pearl matt |
Our Queenply Multiplex – black matt is a very light, stable furniture panel with an easy-care surface that is resistant to pressure and scratches. The low weight (approx. 320 – 350 kg/m³) makes processing easier and saves you a lot of weight later. Due to the multiplex construction, we also achieve the high screw pull-out resistance and the optimal stability.
We calibrated the carrier panel to 0.2 mm.
The HPL on both sides is 0.6 mm thick. We do not use CPL or melamine.
Thanks to the PUR hot melt process, we give the lightweight board a moisture-resistant bonding.
And so that there are no unpleasant surprises directly after delivery, we supply you with the elements on both sides with a transport protection film.
Plywood and multiplex beams such as Queenply Multiplex black matt do not have the same surface properties as chipboard or MDF beams. Any surface irregularities that may occur are in the nature of the substrate and are no reason for a complaint. Production or material-related minimal defects that do not affect the product quality and are permissible within the 1st choice are assessed according to the grading regulations based on DIN EN 438 and the international ISO standard.
We also take great care to ensure that your ordered Queenply panels leave our factory in perfect condition and arrive undamaged. You can rely on that! However, we would also like to point out that any distortion of the panels caused by transport or further storage is not grounds for complaint.
Please also note that the representation of the HPL coloring on your screen may differ slightly from the original colour! If you have any questions about this, simply contact us.
If you are going to process our lightweight panels, please ensure that you take adequate safety precautions, such as extracting the chips and wearing protective goggles and a protective mask. Due to the low weight, there is an increased dust formation when processing the Queenply.
And another important note: We pack your finishing panels with special care before shipping and make sure that they leave our warehouse without any damage to the edges. However, even with the greatest care, it can happen during transport that a corner is pressed in or the edge is slightly damaged. We know that too. That’s why we calculate 1 cm less for each side of every Queenply finishing panel in advance: 249 cm × 121 cm for the raw panel, 243 cm × 121 cm for all composite elements and 247 cm × 120 cm for all veneered panels. This saves us all a lot of time that would otherwise be wasted on complaints. Put this time into your extension – and feel free to recommend us to others.