€418.71*
** You will receive a discount of 2.5% on orders of 5 or more plates from our entire range. For orders of 30 plates or more, the discount is even 10%.
Queenply. The original
- extremely light — extremely stable
- carrier board with 11 layers (thickness 15 mm)
- Veneer: waterproof Kaurit gluing
- calibrated to an accuracy of 0.2 mm
- made from sustainably grown wood
Veneer pattern: wide lamella look. Sustainable material: bamboo. Natural color. On extremely lightweight carrier panel.
Our bamboo veneer in a wide lamella look has a really beautiful veneer pattern that reflects the full wood-like appearance of this sustainable material. Since bamboo is becoming increasingly popular in furniture making not only because of its sustainability, but also because of its inviting color, we naturally also have Queenply with bamboo veneer in our range for you and your interior plans.
You can get our bamboo panel in four different thicknesses, veneered on one side or both sides. The single-sided bamboo veneer (5 mm) is for example perfect for walls and ceilings. In bamboo decor it looks friendly, cozy and inviting! Multiplex boards veneered on both sides are ideal for furniture construction. You can also combine them with great HPL or acrylic decors from our shop. That looks really great.
But no matter which plywood panel you need from us: all variants naturally also have good technical values. Just look at the technical details.
Carrier plate: | Queenply with 11 layers (15 mm thickness) |
---|---|
Format: | 248 × 121 cm |
Thickness: | 16 mm |
Weight: | 17,54 kg |
Coating: | Veneer |
All Queenply bamboo veneers are naturally characterized by their low weight of approx. 320 – 350 kg/m³, their high screw pull-out resistance, their particularly good durability and their moisture-regulating veneer. We have the lightweight panels in 4 mm, 12 mm, 15 mm and 18 mm (additionally veneer) available for you in the shop.
The gluing of the core boards is of course moisture-resistant (MR). And of course, we also calibrate these base panels accurate to 0.2 mm for a higher surface smoothness and a lower thickness tolerance.
Plywood multiplexture beams such as the Queenply with bamboo veneer do not have the same surface properties as chipboard or MDF beams. Any surface irregularities that may occur are in the nature of the substrate and are not grounds for complaint.
We also take great care to ensure that your ordered Queenply panels leave our factory in perfect condition and arrive undamaged. You can rely on that! However, we would also like to point out that any distortion of the panels used by transport or further storage is not grounds for complaint.
As you may already know, veneers are a natural product made of wood and are therefore always unique. That is what makes them so unique. However, this is also the reason why our veneers shown in the shop are only exemplary representations and slightly deviating surfaces are also in the nature of things. Please take this into account in your planning and selection.
When processing the veneer, please ensure that you take adequate safety precautions, such as extracting the chips and wearing safety goggles and a protective mask.
Due to the low weight of the Queenply, there is an increased dust formation during processing.
And another important note: We pack your finishing panels with special care before shipping and make sure that they leave our warehouse without any damage to the edges. However, even with the greatest care, it can happen during transport that a corner is pressed in or the edge is slightly damaged. We know that too. That’s why we calculate 1 cm less for each side of every Queenply finishing panel in advance: 249 cm × 121 cm for the raw panel, 243 cm × 121 cm for all composite elements and 247 cm × 120 cm for all veneered panels. This saves us all a lot of time that would otherwise be wasted on complaints. Put this time into your extension – and feel free to recommend us to others.
You are interested in the Queenply coated on one side? A good choice! However, we would like to point out that these panels can tend to warp slightly due to the one-sided coating and the associated asymmetrical structure.
Even we cannot change this. Therefore, a possible warpage is not a reason for complaint.