Queenply Multiplex Ash veneer
Product information "Queenply Multiplex Ash veneer"
Lightweight panels with ash veneer. Chic surface. Perfect for walls, ceilings, furniture.
There’s something about ash wood! Its grain and color make it simply perfect as a decorative veneer. It can be combined with many other colors and surfaces, for example with one of our color-intensive acrylic decors. There are no limits to your creativity.
And did you know that? Ash wood is a hard wood. Its bending strength exceeds that of oak. It is elastic, abrasion-resistant and tougher than most of our domestic wood species due to its high breakability. Sounds good for van interiors too, doesn’t it?
So, it’s no wonder that we have also developed a Queenply veneer from it: in various thicknesses, veneered on one or both sides. Just as you wish.
But it’s not only the exterior that counts. The technical values also count. You can find all the information you need right here under "Technical details".
| Carrier plate: | Queenply with 11 layers (15 mm thickness) |
|---|---|
| Format: | 248 × 121 cm |
| Thickness: | 16 mm |
| Weight: | 18,24 kg |
| Coating: | Veneer |
The weight of the Queenply Ash carrier panel remains unbeatable: approx. 320 – 350 kg/m³, depending on the thickness. The veneer is also around 50 % lighter than HPL. We achieve the high screw pull-out resistance and the particularly good stability through the multiplex construction – this makes working on your van interior easier for you.
Our 4 mm Queenply with ash veneer is veneered on one side. You can use this lightweight panel for your wall and ceiling panelling. On the other hand, Queenply ash veneered on both sides in a higher thickness ( 13 mm, 16 mm, 19 mm) is ideal for furniture construction.
We calibrate the carrier panels to 0.2 mm, which reduces the thickness tolerance and ensures a better surface smoothness.
The gluing is MR (moisture resistant).
The veneer is moisture-regulating. It absorbs moisture better and releases it again later. This optimises the indoor climate in the camper. This lightweight board is therefore not only suitable for motorhome conversion, but also for the interior finishing of yachts and ships.
You are interested in the Queenply coated on one side, because you can cover ceilings and walls with it really stylish?
A good choice! However, we would like to point out that these panels can tend to warp slightly due to the one-sided coating and the associated asymmetrical structure.
Even we cannot change this. Therefore, a possible warpage is not a reason for complaint.
Plywood multiplexture beams such as the Queenply with ash veneer do not have the same surface properties as chipboard or MDF beams. Any surface irregularities that may occur are in the nature of the substrate and are not grounds for complaint.
We also take great care to ensure that your ordered Queenply panels leave our factory in perfect condition and arrive undamaged. You can rely on that! However, we would also like to point out that any distortion of the boards caused by transport or further storage is not grounds for complaint.
Please note! Surface treatment before installation It is important to oil the raw surfaces of your Queenply before installation. This applies to all veneers and all panels coated only on one side, as well as to the raw panels and all open edges. Why? This makes our Queenply resistant, protects and maintains the wood. We also have a special recommendation for this, which you can order directly: RUBIO® Monocoat Maintenance Oil 2C. One coating is enough with this oil! You can find all informations here.
As you may already know, veneers are a natural product made of wood and are therefore always absolutely unique. That is what makes them so unique. However, this is also the reason why our veneers shown in the shop are only exemplary representations and slightly deviating surfaces are also in the nature of things. Please take this into account in your planning and selection.
When processing the veneer, please ensure that you take adequate safety precautions, such as extracting the chips and wearing safety goggles and a protective mask.
Due to the low weight of the Queenply, there is an increased dust formation during processing.
And another important note: We pack your finishing panels with special care before shipping and make sure that they leave our warehouse without any damage to the edges. However, even with the greatest care, it can happen during transport that a corner is pressed in or the edge is slightly damaged. We know that too. That’s why we calculate 1 cm less for each side of every Queenply finishing panel in advance: 249 cm × 121 cm for the raw panel, 243 cm × 121 cm for all composite elements and 247 cm × 120 cm for all veneered panels. This saves us all a lot of time that would otherwise be wasted on complaints. Put this time into your extension – and feel free to recommend us to others.
Maintenance Oil
High-quality starter kit for caring your panels. Soap. Oil. Pads. All from Rubio brand. In our Rubio® Monocoat Easy Care Kit we have put together for you: 100 ml Rubio® Monocoat Universal Soap 100 ml Rubio® Monocoat Universal Maintenance Oil 20 ml Rubio® Monocoat Oil Plus 2C Application pad and cloth The Universal Maintenance Oil is an ideal companion in the camper because it is a maintenance oil for refreshing and aftercare. Many surfaces in your van will certainly be subject to frequent and heavy wear. The oil ensures that the surface continues to look like new and remains more resistant to dripping. RUBIO® MONOCOAT Universal Soap is a maintenance product for regular cleaning of oiled Queenply surfaces. The soap removes dirt and grease completely, but preserves the matt, natural appearance of the wood. This is important so that you can enjoy the beautiful wood look for a long time. You can find more comprehensive information about the extremely high-quality Care Oil Plus 2C in the separate product description in our shop.
High quality maintenance oil. For all Queenply veneers or edges. Environmentally friendly. Only one coat. If you have chosen one of our veneered Queenply, it is certainly important to you that it gives you pleasure in your van for as long as possible and does not lose its charisma. That's why it's a must to take care of our queenply and treat it with a care oil even before installation to maintain its value and resistance. This applies to all veneers as well as to the raw boards and all edges. Perfect protection and best care for your wood. We have a special recommendation for you: Rubio® Monocoat Maintenance Oil 2C. It is the perfect partner for your Queen. It protects and cares for the wood with just one single coat. Moisture or mechanical damage such as scratches or scratches don't stand a chance. And thanks to the high-quality ingredients, the effect of the beautiful surface is maintained. Extremely resistant. As the oil is also used in parquet and flooring, it is extremely resistant. Just as necessary when travelling in a camper. And it is water and heat resistant - which is another reason why we recommend it for the care of our Queenply. The oil is clear, so it is equally suitable for all veneers and colour shades. One oiling is enough! Important for you: You only have to oil the surface once after sanding! One working step is enough. That's less work for you and you can start installing sooner. If you are a thrifty person: Our oil is even cheaper in the end than some other maintenance oils that have to be applied twice. And that's with the great quality. Just take a closer look at all the other technical information and the instructions for use. We are sure you will be convinced!
Sponge set plus holder. Perfect for applying Rubio oil. Easy to use. This set is perfect for manually applying and working in the Rubio care oils.The set contains 5 beige pads and 1 scrubby holder – very easy to use. Perfect for our panels, because working the oil in with the pads allows it to penetrate deeper into the wood, providing even better care and protection.