Imi-sandstone (MDF panel)
Product information "Imi-sandstone (MDF panel)"
Decor 1053. Natural sandstone reproduction on MDF panel. Mineral base. Easy to install.
Carpenters and joiners can now also build with sandstone, as the mineral coating of this MDF panel means that there are numerous possibilities for easily integrating the beautiful look and feel of sandstone into interior fittings.
The imi-sandstone decor is indistinguishable from the original. It looks like sandstone, has the same warm color tone and feels like sandstone, but is much easier and faster to work with. With conventional carpentry tools.
Any ideas yet? Perhaps for furniture construction, as wall panelling, on stairs, for exhibition stand construction, shop fitting or for private spaces? It makes a lot of things look very stylish. The surface is robust thanks to a special surface treatment.
Before you start planning, take a quick look at the technical details. Here is some important information for you - for example on environmental compatibility, processing and care.
| Format: | 260 × 101 cm |
|---|---|
| Weight: | 42,016 kg |
| Coating: | Stone |
Structure and surface
The imi-sandstone MDF panel is a 19 mm thick MDF carrier panel with an approx. 1 mm thick mineral coating on one side in a sandstone look (side A).
Side B is covered with a white melamine backing. The panel edges are raw.
Due to the mineral coating on one side, these MDF panels are subject to slight tension.
The sandstone decor is made of mineral, solid-colored material that is coated with a matt lacquer. It is durable and robust, but is of course also subject to normal ageing processes.
Panel dimensions
2600 mm × 1010 mm
3030 mm × 1200 mm
Special formats / optimised dimensions on request
Thickness
You can order this composite panel in approx. 20 mm thickness from our online shop.
Classification
The mineral coating is classified as non-combustible A2-s1, d0 in accordance with the German DIN EN 13501-1.
Sustainability advantage
This product is recyclable. You can easily dispose of leftovers with household waste. Both, the coating and the material of the carrier panel are ecologically harmless.
Higher loads
An additional matt protective coating is recommended if it is expected to be subjected to higher loads.
Cleaning and care
You can treat this surface like a normal veneered, lacquered surface. We recommend cleaning with a damp cloth.
Normal carbide-tipped tools are sufficient for further processing of these high-quality coated MDF panels (sawing, drilling, routing).
The screw pull-out resistance is the same as for any other MDF panel. We recommend pre-drilling.
These panels can be glued with standard wood glue.
If you put the panels into storage, please store them in a dry place and protect them from frost. Please use foam foil as an intermediate layer so that you can enjoy this beautiful coating for a long time.
And please note the following information:
The main component of imi mineral coatings is organic. This means that color differences between different batches cannot be completely ruled out, even though we take great care to avoid them. Differences of this kind, as well as air inclusions, are natural and are no reason for complaint. Due to the nature of the product, slight warping and slight offsets in the joint area cannot be completely ruled out – despite all the precision and care we take.