Full-threaded black screws with hinge-head
Product information “Full-threaded black screws with hinge-head”
Chipboard screw with hinge-head. Black with full thread. Perfect for fixing our ceiling panels.
These special black fully threaded screws are the ideal installation accessories for our Ultralight 3D ceiling panel. They allow you to fix the panel perfectly. The screws are corrosion-resistant (500-hour salt spray test) and have a large, rounded Torx head. The advantage: if you fix the ceiling panel in the fleece area using these screws, it’s not just a color match. The wider shape of the head holds very securely in the fleece and… – you can still pull a light strip through the groove later on. The flattened screw head won’t get in the way. That’s a tip from our professional fitters.
But of course, the screws are also suitable for building furniture and cabinet structures. The fully threaded shank, which begins immediately below the head, enables a high-load-bearing material joint designed to withstand pull-out forces. Increased pull-out resistance is achieved through the maximum thread length.
So you can use it to build really sturdy structures, fit hinges, join individual panels together or create strong bolted connections in substructures.
The screws are 30 mm long. We recommend this length for working with our thicker Queenply panels (15 mm and above) and for fixing our ceiling panels (we also recommend using suitable washers for this purpose).
Please find more technical details under „technical details“.
We have put together some further technical information about our fully threaded screws for you here:
- Material: hardened steel
- Color: black
- Surface finish: black zinc-nickel
- Nominal diameter: 5 mm
- Length: 30 mm
- Head shape: gate hinge head
- Head diameter: 12.2 mm
- Head height: 2.8 mm
- Internal drive: RW20
- Thread type: full thread
- Thread form: coarse pitch
- Thread length (lg): 27 mm
- Shank diameter: 3.2 mm
- Tip shape: tip with ball-end cutter
- Tip angle: 34 degrees
- Min./max. screw-in angle: 0–90 degrees
- Product weight (per piece): 0.800 g
- Approval: ETA-11/0190
- RoHS-compliant: yes
We supply the screws in sets of 50 or 100.
And if you’re interested, do have a look at the installation video on our YouTube channel.
Before you start further processing and finishing work on our lightweight panels, please make sure that you have adequate protective measures in place, such as wearing safety goggles and, if necessary, a face mask. For drilling or sawing work, it is advisable to additionally wear hearing protection.
Especially with our coated panel materials, the ambient temperature is important during processing. Therefore, make sure that the room temperature is comfortable when you start.
For more information on the screws, please visit the manufacturer's website, as well.
Login
Passend für
One of the lightest ceiling cladding systems on the market. Optimised by us. Better performance than others – fancy a bet? Are you still looking for ceiling panelling for your van, or perhaps – for the really creative among you – some wall panelling? Then you really must take a quick look at this ceiling panel. This type of panel has been used in the caravan industry for some time now – we’ve optimised it further for you, and it can do more than many others. Here are the key facts: Weight: At 1.236 kg/m², this is one of the lightest ceiling panels currently available on the market. It might even be THE lightest. Do have a look. That means for you: easier to handle during installation. It means for your vehicle: better handling thanks to a lower centre of gravity at the ceiling. Dimensions: 420x125cm – making it one of the longest ceiling panels on the market. It even fits the Sprinter L3. For you that means: no heading joints on the ceiling and a quicker installation. You’ll need to cut less, there’ll be far less waste, so you’ll save money and we’ll all produce less rubbish. Tip for professionals: You’ll usually need 1½ panels from our range to fit out a vehicle. Any leftover panels can be used in the next vehicle. Composition: Foam, non-woven fabric and CPL oak finish – stylish and: no sanding, oiling or varnishing required. Save yourself the hassle of wood dust and oil residue in the joints. Naturally, everything is PU-glued. As you know, we wouldn’t dream of using anything else. This makes the panel waterproof – so it’s also perfect for kitchens and bathrooms. Tip: The grooves in the panels are 15 mm wide. We designed them that way on purpose. Why? So you can use all standard LED strips – no fiddling about! And you’ll have a much wider choice for your ceiling lighting. And why 3D? Because the panel is slightly flexible both lengthways and widthways – making it ideal for gently curved ceilings, such as those in the Sprinter. Do you need more information to convince yourself? If so, please have a look at the technical details.